NORTH SAILS BLOG

MEET THE WOMEN OF NORTH SAILS TORONTO Talented & Experienced, Our Teams Focus Is Maximizing Your Sailing In the sailing industry we're faced with intense seasonality on the Great Lakes (compared to other areas who can sail year round) which means the season is short and the pressure to maximize results is high and a guessing game of conditions. A shorter season means most racers want to achieve the greatest results they can within the 4 or 5 month span of Summer, which is usually flagged by lack luster wind (sorry Mother Nature, it's true). Cruisers want to maximize their time on the water, enjoy the sunshine and breeze as well. Everyone's trying to maximize our short season, so our job at the Toronto loft is vital as we try to keep sailors on the water as much as possible and manage the stress of sails in for repair or delivery of new sails. Kyann is on the floor majority of the time servicing sails while I spend most of my time upfront working on marketing and interacting with customers. Come Summer we spend more time outside the office than in, helping customers install sails, picking up sails or delivering them, measuring boats or doing sea trials. Last year at the 2018 Susan Hood Trophy Race, we installed a new mainsail on a Perry 57 - with hardware - hours before the skipper meeting and start of the race. Not something you see everyday - both the install or the two women doing it. Not something of the norm yet in the community (yet) which results in a little bit of surprise when we are seen coming down the dock with battens or sails. It is a great feeling when someone asks who they should talk to for a quote or a new sail and you respond by saying they can talk to you. You can quote them - then delve into questions about what they're looking for, what type of sailing they do and what the best options are for them and the technology in the sails. This feeling continues when delivering sails; most people are pretty surprised to see a young female lugging sails down the dock or up a mast fixing things. To say we're used to it would be an understatement however we enjoy surprising customers and helping with all aspects of sailing + sailmaking. While sailing has historically been a male dominated industry, there are a great numbers of female sailors and athletes who can a) sail and b) help customers with their sailing needs, especially at a company like North Sails. Kyann and I both have the experience. Kyann has been sailing since she was 11 years old, starting in junior sail at Etobicoke Yacht Club, working here way up to racing by the age of 13. She's also raced down south on Open 60's in places like Malta and Antigua while also sailing 8 Metre's, Shark's, Beneteau's and Soto 40. I have nine years in the marine industry with lots of experience in event coverage, management and support for sailors. I've also sailed Beneteau's and J/Boats, growing up sailing a Beneteau 36.7. It's a wonderful thing to work for a company that recognises this experience and work ethic; aiding in the continued growth of our skills and knowledge. Beyond our office, athletes like Sally Barkow, Marie Riou and Carolijn Brouwer are competing in the Volvo Ocean Race, America's Cup and World Match Racing Tour. Riou is the only sailor competing in the Sail GP event with the French Sail GP team while Brouwer is looking to be the first female skipper in the America's Cup and Barkow is trying out for Stars + Stripes Team USA. Additionally, we’ve seen teams like Team SCA from the 2014/2015 Volvo Ocean Race to Team Magenta 32 who competed in the World Match Racing Tour have helped change the stage for women in professionally yachting. We're both fortunate to work for a company that supports women in sailing and the marine industry as a whole. North Sails has welcomed our enthusiasm and supported our drive to get out on the water more, supporting customers as much as we can. We love the industry that we both never thought we'd ever be working in and it's fantastic to witness the growth over the last couple of years for female sailors. Kyann and I are both looking forward to the season ahead with our North Sails team and customers. Happy International Women’s Day to all! Check out more leading ladies changing the tides in sailing. READ MORE

HELLY HANSEN NOOD REGATTA SAN DIEGO The Kick Start To The Season | March 15 - 17 The Helly Hansen NOOD Regatta is coming to San Diego March 15 - 17, and our San Diego and Long Beach teams will be there for all your sailing needs. Local experts will be on hand during the regatta for any sail care issues you have and our overnight regatta repair will ensure you're back on the racecourse without any worries. Overnight Repair It's the last thing you want to deal with after a day of racing, so let us. Our Certified Service experts will be on shore for you after each race day to collect sails for overnight repair. The North Sails van will be at CYC after racing on Friday and at SDYC on Saturday. You can pick up your sails at 8am on Saturday and Sunday at SDYC. If you have any questions, contact Bobby Richards: 619-846-3967 Dock Talks North Sails experts, Eric Doyle, Brian Janney and Chris Snow will be holding a series of dock talks, focusing on the immediate feedback from the race course. Look out for the North flag and crew and join your class dock talk to work on how you can improve, or keep on doing it right, for the next race day. Friday March 15 | Coronado Yacht Club J/70 with Chris Snow RS21 with Brian Janney Viper with Jay Golison Saturday March 16 | Corondao & San Diego Yacht Club Etchells with Eric Doyle RS21 with Brian Janney North Sails Rally Race Back for its 5 edition, the North Sails Rally Race is the perfect event for all types of cruisers. Rally racers are able to get all the benefits of a regatta with one day of racing. To top the day off, the NOOD after party at SDYC is the place to be for the Rally Race prize giving. Make sure you attend and claim your award and spot on the podium. READ MORE

TOM DODSON RETURNS TO NORTH SAILS Kiwi Sailing Legend A Key Hire For Supporting Superyacht Clients Following a long career in sailing spanning two Olympic Games, numerous America’s Cup cycles and everything in between, native Kiwi Tom Dodson has rejoined North Sails as a Sales Expert with a particular focus on the vibrant superyacht segment. Based out of New Zealand, Dodson will bring his knowledge and expertise to an already impressive team and will work with superyacht owners and crews around the world including regattas in the Caribbean and Mediterranean, ahead of the expected influx to the Pacific in time for the 2021 America’s Cup in Auckland. Having first joined North Sails New Zealand as Managing Partner back in 1986, he left to join Team New Zealand in 1998 then joined Southern Spars as President in 2004. The well-known sailor has retained his connection with North Sails over his years as a professional in the sport, and now brings his wealth of experience back to the company to help to continue to grow the highly successful superyacht sails part of the business. “In some ways, I never really left,” Dodson says. “I’ve always supported the company, its products, and people. The North team has been doing a great job, but what we see in the next few years is that there is going to be a lot more traffic coming down to New Zealand around the America’s Cup, and definitely lots more superyacht activity in the region. Through sailing on boats like Velsheda and Silvertip I have kept up with the latest products and what’s happening in these fleets and I am really looking forward to working with the team at North Sails on how we can help clients have the very best sails for whatever sailing they want to do.” Ken Read, President of North Sails, commented: “We have an unrivaled breadth and depth of talent here at North Sails, from designers and materials experts through to sailors and our sales team. Tom Dodson is a consummate and seasoned professional, who ever since he first joined the company in the 1980s has remained part of the wider North Sails family. As a business we have focused on building for the future and investing in technology and innovation so that we stay at the very forefront of the industry but we have also invested in our people, and Tom Dodson coming back to join us is testament to this long term relationship we have with the people that work with us.” Jens Christensen, North Sails superyacht segment leader, said: “We are pushing boundaries in the superyacht industry, leading the way with new products and striving for the ultimate customer service experience. But we can only deliver the type of world-class service to complement the hardware if we have the best people working for us. We pride ourselves on making sure that we understand the individual needs of all types of boats and sailors, and are able to support them across the world with continuity and consistency of product offering and maintenance. We are delighted that Tom joins us to help us continue our work at our superyacht centers of excellence around the world, showcasing the best of the best talent in the superyacht industry.” READ MORE

NORTH U AT NORTH SAILS DETROIT North U Expert Bill Gladstone Stop By To Discuss Sail Trim And Boat Speed We had 54 people (near capacity of 60) attend North U's full day Seminar Feb. 23rd on sail trim and boat speed. This on the heels of the 110 people that attended the January Thursday Evening Seminar covering tactics and trim. Everyone who attend the Full Day Seminar seemed to enjoy it. How can you not, Bill Gladstone is an excellent speaker! The local loft provided coffee, water, soda and snacks throughout the day. We even had beer out during the last break. This was not included in the price of the seminar. We did have a donation can out to benefit DRYA Jr Sailing. Karl Kuspa, loft manager, personally committed to match dollar for dollar for the first $150. We raised $120. At the next seminar we will be asking for donations to benefit the Bayview Mackinac Foundation. The next free seminar is March 14th, from 7-9pm covering Mackinac Race Strategy, weather and routing. This is event will be at Bayview Yacht Club. Please RSVP to Detroit Office Manager, Chelsie Strong at chelsie.strong@northsails.com. READ MORE

SPECIAL VISIT AT NORTH SAILS LOFT A thank you from Emirates Team New Zealand, to welcome North aboard on their journey toward the 2021 America’s Cup. Not everyone gets to touch the America’s Cup — but the lucky team at North Sails’ Auckland loft recently had the privilege, where the historic trophy came and paid a visit. A group from Emirates Team New Zealand, including the Cup’s own personal ‘bodyguard’, brought the silverware from its home at Auckland’s Royal New Zealand Yacht Squadron to the Glenfield loft, where the staff were able to hold and be photographed with it. The special visit was a thank you from Emirates Team New Zealand, to welcome North aboard on their journey toward the 2021 America’s Cup. North Sails is the international supplier of choice for not only Team New Zealand but also the Luna Rossa Challenge, Stars & Stripes Team USA and INEOS Team UK. Blanks for the new sails will be made at the specialist North Sails three-dimensional moulding loft in Minden, Nevada, and finished and detailed to Team New Zealand’s specifications in Auckland. The North Sails Auckland team will work closely with Rob Salthouse from Emirates Team New Zealand, himself a former sailmaker with years of experience in Cup competition. The Cup made its trip over the Auckland Harbour Bridge in a case specially designed and built by North Sails, from 3Di fabric, for its journey to London jewellers House of Garrard for a check-up last year. The 2021 event is seeing a return to the use of more ‘traditional’ sails than the hard wingsails used in Bermuda and San Francisco, but the new America’s Cup 75 foiling monohulls will still break new ground with their innovative ‘softwing’ double-skinned mainsails. Long-time North Sails designer Burns Fallow, who is currently embedded with Emirates Team New Zealand, was a key member of the team developing the AC 75 class rule and was instrumental in developing the new softwing system. The North Sails team has a busy few months ahead, with the first new Cup boat to be launched in late winter. "It was a great chance for our team to get to see the 'Holy Grail' and to really show them why we do this," says North sales and marketing manager Andrew Wills, who got his own 'selfie' with the silverware. "We are very proud to be part of the campaign — it’s going to be an exciting few years coming up." READ MORE

NORTH SAILS TRIM SEMINAR AT HOWTH YACHT CLUB Training Provided By Your Local Experts North Sails Ireland had the pleasure of presenting their latest sail trim seminar at Howth YC last night for its members and guests. I counted over seventy people in the audience and my colleague Maurice "Prof" O'Connell took the lead backed up by Shane Hughes the newest member of the North Sails Team here in Ireland. Both Maurice and Shane as well as being top level sailors are exceptional coaches both on and off the water. Not only do they know their subject inside out they have a really nice way of presenting that makes the complicated subject of sail trim understandable for expert and beginner alike. One of the big features of the latest talk is the use of North Sails Trim simulator. Please take a look at the link to download your own copy to experiment with at home: North Sails Trim Simulator This fantastic training tool was developed by Bill Gladstone and his Team at North U, the training and teaching arm of North sails. The simulator uses real information from the North Sails Design Suite to produce a really accurate presentation of the real changes to sail shapes when you make a change to the set up. You get to view the changes from on board and off the boat all in the comfort of your own home without getting your feet wet! The North Sails Roadshow has been all over the country during the last few weeks and Prof is in action again this weekend in The Royal St George YC Saturday, March 2nd at 12pm. Then we are off to the East Antrim Boat Club on the following Wednesday, March 6th. "Keep an eye out for a North Sails Talk near you! Sail Fast and have fun!" -Nigel Young, North Sails Ireland READ MORE

SPEED READING: ETCHELLS MAST LEVER Tips From Expert Andrew “Dog” Palfrey The Etchells is one of the most competitive and prestigious one-design classes in the World. Sailors have been challenged to find the boat’s extra speed for over fifty years. We had a chance to interview two-time Etchells World Champion Andrew “Dog” Palfrey, the developer of the popular Mast Lever System. Dog, thank you for all your great contributions to the Etchells class. Compared to a few years ago, the boat sure seems easier and more fun to sail. Being able to make some very simple, but substantial adjustments easily makes the boat easier to sail fast across the wind range. Many thanks for the nice comments and also for the opportunity to help spread the good word to our fellow Etchells sailors. It is gratifying for me to go to Etchells events and see almost universal take-up of the Lever system. As you mention, it does make life easier for the teams to extract best performance from the aero package. Focusing specifically on the use of the mast lever, in simple terms: What is the correct move with the lever and the mast at the deck as you go from light to moderate breeze to stronger breeze during a race? Along with the sheets, the traveller and backstay, the mast lever control is a primary control in helping to get the best from the mast and sails. The most challenging thing about the Etchells mast and rigging geometry, is that we lack direct control of the headstay (via runners). Also, we can only declare one mainsail and two jibs for the big events, so the ability to power-up and de-power both sails is fundamental to extracting the best performance from an Etchells across the wind-ranges and sea-states we sail in. I primarily consider the lever system to be a tool that either stiffens or softens the bottom two-thirds of the mast. In basic terms, we want to stiffen the mast in heavy airs and soften in lighter airs. So, to answer your question, on a day where the breeze is strengthening, we would progressively move the mast (via the lever) aft at the deck – thus stiffening the lower two-thirds of the rig. We need to remember that the effectiveness of the lever is limited by the position of the mast, relative to the mast partner hole (in the fore-aft plane). Headstay length and mast-step position are the variables here. “In an ideal world, we are always going upwind with the mast all the way back in the partners hole. Why? This gives us the ability for the mast tip be as far forward as possible on the downwind leg. We know this to be fast in all but very windy conditions.” If we are sailing upwind before the start, and the perfect position sees a gap between the trailing edge of the mast and the back of the mast partners hole, I will consider going aft on the step or lengthening the headstay to close that gap. However, if the forecast is for the wind to increase, I will make sure there is a gap there. This way we have the ability to effectively stiffen the mast by pushing the mast back with the lever. So, having the step a little further forward and/or the headstay length a little shorter than perfect is good insurance in a building breeze. © Onne Van der Wal As you either move the lever back or let it forward, what changes are happening to the headstay sag and lower mast bend? Really good question. In basic terms, moving the lever alters where the maximum bend is allowed to happen vertically in the mast, with the application of backstay and/or mainsheet load. Simply put, if the lever is pushing the mast aft at the deck, the bend will occur higher up the mast (and vice versa).The effect of a stiffer lower section of the mast also sees the headstay become firmer with the application of backstay and/or mainsheet. When looking for power, we are generally looking to induce headstay sag. So we allow the mast to bend below the hounds (this also helps the mainsail shape in light airs). The lever will either be pulling the rig forward at the deck (creating pre-bend), or in a neutral position. The mainsail is designed so that minimal backstay is required in lighter winds. Sometimes we are looking to sag the headstay more without changing the mainsail shape at all. This is possible with subtle changes of the lever, backstay and mainsail changes together. When it is windy and we are looking to de-power, we are generally looking for a firm headstay. This generally means stiffening the mast below the hounds, so the effect of backstay and mainsheet more directly tightens the headstay. “When I look around the fleet when I’m sailing or coaching, the biggest variances I see are in headstay sag. When I am sailing, I find the hardest thing to set up accurately is the headstay sag. This is because it is not easy to see and replicate and there is no way to accurately reference the sag directly with a mark. But it is one of the key drivers in extracting best performance out of an Etchells.” I look closely at the entry angle of the jib. If it is very fine, we probably need more sag. Likewise, if it very blunt, I will either ease more jib cunningham or look to remove some headstay sag with the application of mast lever and a little backstay. I also carefully observe the dynamic behavior of the headstay. If it’s windy and wavy and the headstay is moving around a lot, I will prioritize firming it up with more aft lever, tighter backstay and mainsheet. Is there ever a condition where you leave the lever uncleated? Just allowing the mast to float in the partners? Never. Allowing the mast to move, or “pump” over every wave will be constantly changing the shape of both sails in a subtle, but counter-productive way. However, in light to medium winds, I do like to know where neutral is. In our tune-up, I will ease both the forward and aft control lines and observe where the mast is happy sitting. That tells me where the step is positioned relative to the gate and helps me make decisions on whether I should think about moving the step or the headstay length. But then I will cleat the lever controls off again. Regarding the boat hardware: In 2014, when I first set up the lever in an Etchells, there were lines on both the forward and aft controls. But for the past three years I have set up the forward puller with shock-cord, so that is automatic. The advantage of this is that you only have to deal with one control line (the aft puller). I set the shock cord system up with a cleat, so I can disengage it in heavy air (when it is not required). I also disengage it when checking where neutral is. The disadvantage is more weight, as you do need heavy shock-cord to offset any “pumping” and a 6:1 system. But I think the weight is worth it. Being able to adjust the important controls easily (and from the windward rail) is key. Is there a good rule of thumb that can be used for how much “gap” behind the mast to start with? Say at the dock with light tension (10 the the Loos gauge) on the headstay and the mast floating? Yes. As I mentioned above, one of the hardest things to accurately quantify is headstay sag. So any tools that help me replicate fast settings are valuable. The “gap” you mention is one of those tools. On my personal tuning guide, I have the shroud calibration numbers to suit the North Sails tuning guide tensions. But I also have a column for the “gap”. It’s really important, as it is a key indicator of exactly how the mast will behave in the fore-aft plane when sailing upwind and down. When on the dock, I will set the backstay up so it pulls the headstay firm. Making sure the lever controls are uncleated, I then apply more backstay and watch the mast at the partners. When it moves forward slightly (the mast starts to bend), I stop pulling the backstay and then ease a small amount so that the mast moves back to its neutral position. This is approximately 10 on the Loos Gauge, but I find this method is better than measuring the headstay with the Loos Gauge (as they are inherently unreliable at low loads). I then look at (and measure) the gap. I also check shroud tension and headstay length at this time. In light airs, I am looking for no gap at all – even to the point where the mast is hard against the aft edge of the mast gate and bending around it by a factor of 5 or so mm. In heavy airs I like the gap to be around 20mm, or 3/4’s of an inch. The gap is controlled by both the step position and headstay length. Personally, I adjust both step and headstay. But there are many ways to skin the same cat. John Bertrand rarely changes his headstay length and does more adjustment on the step. I would say the most important thing is to develop your own boat’s tuning guide. When racing, make sure you know where you are relative to that. So, if conditions change, or you are lacking speed or height (or have too much – or not enough power), you are best armed to make high percentage decisions on what to change. “Keep in mind that the sails are a living organism. As they age, they do grow a little. This generally means they become a little deeper and a little rounder in the aft sections. This may not be a negative thing in lighter winds and a bumpy sea. When you add a new sail to the boat, be prepared to exercise some flexibility to your setup to achieve the same effect.” We are engaged in a wonderful game that is both complex and yet quite simple at the same time. Our sport rewards experience, so don’t be afraid of trying things. But try to keep a record of what works and what doesn’t. Above all, don’t stop asking questions! Andrew sailing with John Bertrand Andrew “Dog” Palfrey is a two-time Etchells World Champion, professional sailor and America’s Cup coach. Follow Dog’s blog at www.sailing.dog READ MORE

CARNAVAL EM VILAMOURA A North Sails vai estar presente em Vilamoura, durante o Torneio de Carnaval. Procurem-nos para Tips & Advices sobre a vossa North Sails e também para qualquer informação sobre as nossas velas. Velejadores de Optimist e Snipe não percam a oportunidade de saber mais sobre as campanhas em vigor, válidas até ao dia 11 de Março de 2019! Se não nos estiverem a encontrar podem sempre ligar, pois estamos por perto: Vicente Pinheiro - 916 857 896 Joana Pinheiro - 916 830 166 Good Luck & Sail Fast! READ MORE

EXCITING TIMES AHEAD Five yachts enjoyed close racing throughout the three-day regatta in the Bay of Islands at this year's Millennium Cup. 📸 Jeff Brown / Breed Media This year’s Millennium Cup superyacht regatta was just a taste of what is to come in the next few years, as momentum builds towards the 2021 America’s Cup in Auckland. Five yachts, including stalwarts Tawera and Silvertip, enjoyed close racing throughout the three-day regatta, but they could be joined by more than 25 others as numbers grow over the next two years. All five yachts competing this year had sails by North, and many had North Sails experts aboard. Coming out on top after five races was the Ron Holland design Tawera, which also won the event in 2016 and 2017, skippered by Mike Mahoney and with Chris Dickson as tactician. This year her main competition was provided by Swan 90 Freya, a first-time entrant in the Millennium Cup. Also competing were Silvertip, with veteran Kiwi sailors Tom Dodson and Tom Schnackenberg calling the tactics and navigating, Thalia and Sassafrass, which unfortunately had to withdraw after the first day with gear damage. 📸 Jeff Brown / Breed Media North Sails Auckland superyacht specialist Matt Smeaton says exciting times lie ahead for the regatta and for the superyacht industry, as owners start planning a visit to New Zealand to tie in with the America’s Cup regatta and its lead-up. This was the first year the event had been run using the ORC superyacht handicapping system, to bring the regatta in line with international regattas. "ORC is a great thing for the event," says Smeaton. "A team of handicappers came to New Zealand from Italy and sailed a race on each of the boats, to make sure the ratings were accurate, as most of the yachts competing here haven’t raced under the rule before." Smeaton says ORC is “really going to grow the regatta”, hopefully even beyond the size it was during the 2000 America’s Cup, when 36 boats competed in the event. A motor yacht division is also going to be added. This was also the first year the regatta was held separate from Bay of Islands Sailing Week, giving race organisers more scope to lay courses around the islands of the bay and in differing wind directions. Veteran race officer Harold Bennett was at the helm of the race committee, and on shore “the voice of New Zealand yachting”, Pete Montgomery, took on MC duties for the social events, based at Russell’s historic Duke of Marlborough hotel. Unlike during the 2000 and 2003 America’s Cups, when the Millennium Cup event was held in Auckland, future regattas will stay based in the Bay of Islands, giving visiting owners and crews the chance to enjoy one of the world’s most beautiful sailing grounds. Smeaton says he and the North Sails team plan to work closely with superyacht owners and crews over the coming years to ensure they are getting high-quality service. "We are already looking at the boats that are going to follow on from this and come next year," he says. "We are expecting to start seeing more people come down next season, so there will probably be double the number of boats at the Millennium Cup next year. We are really looking forward to seeing these boats coming down into the Pacific, and are going to look after them as best we can." 📸 Jeff Brown / Breed Media READ MORE

RACE RECORDS, LINE HONOURS, AND TOP PODIUM POSITIONS Caribbean 600 Is A Showcase of Success for North Sails Powered Entries 📸RORC / Arthur Daniel / Tim Wright The 2019 RORC Caribbean 600 proved successful for North Sails clients, who captured top podium positions, claiming multi and monohull line honours, and setting a new race record. The 600-mile non-stop race is the Caribbean’s premier offshore ocean race and a highlight of the winter sailing season. Peter and David Askew’s VO70 Wizard claimed monohull line honors and also the coveted RORC Caribbean 600 Trophy, scoring the best corrected time under IRC in their event debut. Skippered by two-time Volvo Ocean Race veteran Charlie Enright, Wizard was powered up and planing around the islands in what the Askew brothers agree is a great race. Starting the year with an early victory sets Wizard up for an intense 2019 sailing schedule which includes the Transatlantic Race, Rolex Fastnet, and Rolex Middle Sea Race. Multi 70 Maserati, skippered by Giovanni Soldini raced around the islands in a record-breaking 1 day, 6 hours and 49 minutes. Soldini and crew had a formidable opponent in Jason Carroll’s Mod 70 Argo who made a quick recovery from a training day capsize and followed Maserati less than ten minutes behind. In a race that almost didn’t happen, Soldini commended Argo for an all-hands-on-deck effort to make the start line on Monday. “It was the first time in history that a multihull so big came back from a capsize like that – incredible,” commented Soldini. I was very happy to agree to delay that start, to race against one of the best teams in the world.” Wizard claimed first place IRC overall, with TP52 Tala up in second. The Caribbean 600 was the first event in the ex-Spookie for David Collins who recently outfitted Tala with the North Helix sails. Tala deployed their Helix Fractional Zero on the first leg North and launched their Helix Masthead Zero on the way to Saber and Rodonda. Gunboat 62 Chim Chim sits on top of the podium with the best correct time under MOCRA in the multihull class. Owner John Gallagher was quick to comment on having a great regatta, crediting mother nature for putting a Super Moon on display for the fleet. Second place Fujin was back for the 2019 race after experiencing a capsize and safe rescue off Saba Island in 2018. Back on the dock in Antigua, Fujin owner Greg Slyngstad remarked that crossing the finish line was emotional, and a milestone in moving past the events of 2018. After CSA time correction, the overall winner of the CSA Division was Wizard. Franco Niggeler’s Cookson 50 Kuka 3 skippered by veteran ocean racer Chuny Bermudez claims second place. Todd Stuart’s Carkeek 47 White Rhino 2 rounds out the CSA Overall podium with third place. Class 40 Earendil from France won their class against a record number of entries in 2019. This is the second consecutive win for skipper Catherine Pourre who said the race was stressful and boils her team’s success down to smart sail selection. “The key factor was having the right sails for the different legs,” remarked Pourre. “It was match racing all the way, especially at the end and we were really under pressure all of the time. Superyacht Nikata saw 12-18 knots of boat speed as they dashed around the Caribbean islands. Navigator Askel Maghdal remarked, “the Caribbean 600 is super busy, we’re turning corners all the time. We didn’t get much sleep, but this race is a must do to put on the calendar.” READ MORE

CONSEJO NORTH SAILS ¿Qué significa NPL? NPL es el acrónimo de North Panel Laminate y hace referencia al material producido utilizando el laminador de tejido más avanzado del mundo. La magia de nuestras velas NPL se encuentra en el proceso integrado Exact, que permite la aplicación instantánea de x-scrims de ángulo variable (hilo unidireccional entre dos films). Nuestro proceso exclusivo permite una magnífica adherencia con la mínima utilización de adhesivos. El resultado son velas más ligeras y robustas, con menor rango de estiramiento y una durabilidad superior a la de otros laminados. Nuestra gama de velas laminadas NPL ofrece tres versiones: NPL Sport, NPL Tour y NPL Downwind. Para más información, contacta con tu agente North Sails, visita www.northsails.com o escríbenos a info@es.northsails.com READ MORE

REUNIÓN DE DISEÑADORES La localidad estadounidense de Marblehead (Massachusetts) acogió la reunión anual de los principales diseñadores de velas de North Sails. Durante tres jornadas, 23 expertos de ocho nacionalidades compartieron ideas sobre los avances realizados en 2018 y los proyectos de 2019, con especial énfasis en el desarrollo de velas, el perfeccionamiento de la herramienta de diseño North Design Suite y los paquetes básicos para equipos de competición, donde se aplican innovaciones que una vez probadas en regatas de alto nivel se podrán aplicar a las velas que comercializa North Sails. "Contamos con diseñadores de talento apasionados por hacer que los barcos naveguen más rápido", explica JB Braun, director de diseño e ingeniería de la firma. "North Sails nos ofrece una oportunidad única en software, maquinaria y organización, permitiéndonos operar a un nivel súper alto, fabricar velas y conseguir opiniones inmediatas de regatistas profesionales". READ MORE

STARS & STRIPES TEAM USA TAMBIÉN ELIGE NORTH SAILS El equipo estadounidense Stars & Stripes Team USA ha elegido North Sails como diseñador y proveedor oficial de velas para su desafío por la 36 America’s Cup. 📸 Stars & Stripes Team USA Este anuncio se une a los de los desafíos italiano Prada Luna Rossa y británico INEOS Team UK, y del defensor neozelandés Emirates Team New Zealand, quienes también confían en el líder mundial. JB Braun, director de diseño e ingeniería de North Sails, será además el director técnico de Stars & Stripes Team USA. "Llevo más de 18 años involucrado en la America’s Cup, y en ese tiempo he visto cómo tecnología e innovación han cambiado las cosas a niveles irreconocibles", explica Braun. "Pero una cosa permanece invariable: siempre gana el barco más rápido. Nuestro desafío esta vez, con un barco nuevo y tanto por aprender, es cómo asegurarnos de que navegamos con trimado óptimo un mayor porcentaje de tiempo que nuestros rivales". READ MORE

NORTH SAILS ESPAÑA, AL SERVICIO DE LA VELA North Sails cuenta en España con cuatro velerías, incluyendo la mayor en servicio para superyates y una de las siete que fabrican velas de la firma en el mundo. Una estructura de más de 70 profesionales al servicio de la vela. 📸 Ian Roman Las plantas estadounidenses de Milford (Connecticut) y Minden (Nevada), la neozelandesa de Auckland, la esrilanquesa de Colombo, la británica de Gosport y la española de Cuntis cubren la demanda mundial de velas North Sails, que asciende nada menos que a 33.000 unidades anuales. La firma cuenta con 1.600 empleados, 110 velerías con servicio certificado y 150 puntos de venta. En España, la estructura de North Sails está compuesta por cuatro velerías en Palma, Valencia y Cuntis, además de las oficinas comerciales ubicadas en Barcelona y Málaga. En total, algo más de 70 profesionales, incluidos 40 comerciales, que en 2018 vendieron cerca de 700 velas en nuestro país. Pero la labor de North Sails España es mucho más que la de vender las mejores velas del mundo. "Nuestra vocación es la de dar servicio al cliente, que esté contento y conseguir fidelizarlo para mantener con él una relación que se prolongue en el tiempo", explica Luis Martínez Doreste, director comercial de North Sails España. "La calidad de las velas North Sails es innegable, pero la clave del éxito está en el servicio". El equipo liderado por Martínez Doreste comercializa todas las referencias del extenso catálogo de la firma, desde Óptimist hasta superyates, desde clásicos hasta monotipos, desde crucero hasta vela de alta competición. "Por número de unidades, lo que más vendemos son productos de vela ligera, pero por facturación los más importantes son el nicho Premier Race –barcos de serie utilizados en regata– y los One Design". Cuntis, una de las siete La velería de Cuntis (Pontevedra) es uno de los siete centros de producción de North Sails en el mundo, uno de los tres de Europa y el único que fabrica velas en España. Sus instalaciones constan de tres plantas y cerca de 4.000 metros cuadrados que incluyen una espectacular sala diáfana de más de 1.000 metros cuadrados. Al frente se encuentra toda una institución, Manolo Lastra, auténtico gurú del sector con más de cuatro décadas de experiencia. Aunque fabrica también velas de portantes, la velería de Cuntis es una de las dos plantas North Sails especializadas en clásicos, junto a la estadounidense de Milford. "Fabricamos del orden de 400 velas al año, de las que alrededor del 25% son velas de clásicos", explica Lastra. Para responder a la demanda del mercado, el personal de la velería recurre al saber hacer de entre 20 y 30 expertos veleros en función del ciclo de producción. Superyates, en Palma Gracias a su posición estratégica en el Mediterráneo, Mallorca concentra prácticamente la mitad de la estructura de North Sails España. Sus dos velerías de Lluchmajor y Palma suman 6.500 metros cuadrados de superficie, y su plantilla asciende a 42 trabajadores, erigiéndose como referencia absoluta entre las velerías especializadas en superyates del mundo. "Nuestro objetivo es que los capitanes de los barcos no se preocupen de nada desde que llegan a puerto", explica Marc Patiño."Descargamos las velas, las transportamos hasta la velería, realizamos un informe detallado de cada una de ellas, completamos las reparaciones o modificaciones que nos pidan, y las devolvemos al barco". Por las velerías de North Sails Palma pasan una media de 180 velas al mes, y sus instalaciones tienen capacidad para almacenar más de 2.000 velas. "Damos servicio a barcos de todo tipo, desde Óptimist, windsurf o crucero regata, hasta colosos con velas 3Di de una tonelada de peso". La estructura de North Sails en la isla incluye una veintena de veleros, diez comerciales y diez especialistas en logística. Multiservicio, en Valencia La velería de North Sails Valencia cuenta con una ubicación privilegiada junto al Real Club Náutico de Valencia. Sus instalaciones constan de aproximadamente mil metros cuadrados de superficie donde se ofrece todo tipo de reparaciones y modificaciones de velas para todo tipo de embarcaciones. "Ofrecemos desde asesoramiento técnico hasta confección", explica Nacho Braquehais."El servicio es prácticamente integral, e incluye desde desmontar, revisar, reparar, modificar y limpiar velas, fundas y capotas, hasta almacenarlas para hibernar o probarlas con el cliente". La actividad de la velería no cesa durante todo el año, aunque los meses con mayor carga de trabajo se concentran entre marzo y junio. Al final de la temporada, North Sails ofrece un interesante servicio de chequeo "que permite detectar con tiempo las reparaciones o modificaciones que requerirá la vela para aumentar su rendimiento y vida útil, y así poder programarlas de manera que la vela esté en perfectas condiciones cuando el cliente la necesite". Las cuatro velerías cubren la demanda del mercado nacional, pero la ambición de North Sails España es no sólo consolidar su posición como líder del sector en nuestro país, sino incrementar su presencia por las costas españolas y fidelizar al cliente con una relación todavía más directa y cercana. "De cara a 2019 queremos evolucionar en oferta de servicios y ampliar nuestra red de puntos North Sails para cubrir todos los puertos y marinas de la costa española", concluye Martínez Doreste. READ MORE

PRVO PH U 2019. JE USPJEŠNO ODJEDRENO foto: Hrvoje Duvančić – www.regate.com.hr Jedriličarski klub Val iz Šibenika i Wave Sailing Center bili su organizatori Prvenstva Hrvatske u dvobojskom jedrenju, na regati koja je ujedno bila i uvodni događaj u ovogodišnji ciklus European Match Race Toura. Sudjelovalo je sedam ekipa iz Hrvatske, Slovenije i Danske. Iz Danske je stigao, Downhill Sailing Team, mladi momci predvođeni Emilom Kjaerom (ISAF rank: 100), kojem je ovo bio treći nastup na jednoj match race regati u Šibeniku. Od slovenskih jedriličara tu su bili Jure Jerkovič (ISAF rank: 226) i Bojan Presen (ISAF rank: 142) koji su sa svojim posadama već odjedrili nekoliko regata u Šibeniku. A Hrvatsku su predstavljale lokalne zvijezde u usponu, posada WSC Sailing Team-a, sastavljena od srednjoškolaca i brucoša kojima je glavni i odgovorni Marko Smolić (ISAF rank: 169), turbo iskusni Murterski jedriličari koje je nakon duže pauze još jednom okupio Tonko Rameša (ISAF rank: 333), te dvije posade iz Splita. Posada Tome Stipanovića (ISAF rank: 803) koji je već ranije krenuo sa skupljanjem bodova za ISAF match race ljestvicu, dok je premijeru u match raceu imala posada splitskog Pomorskog fakulteta koju je predvodio Toni Bušić. Od standardnog termina u kojem se PH jedrilo nekoliko prethodnih godina, odustalo se nakon problema s organiziranjem istoga za 2018. godinu. Zato je iskorišten termin EMRT-a, a regata je ujedno dobila i na dodatnoj kvaliteti nastupom iskusnih inozemnih posada. Program regate je predvidio kvalifikacijski dio s dva Round Robina, te finalni dio s King of the Castle, polufinalom i finalom. Regatu su otvorili parovi Kjaer - Bušić i Rajar - Stipanović. Jedrili su po buri koja je konstantno puhala oko 20 čvorova. Snaga vjetra i čudljivost burinih refula bili su razlog mjere predostrožnosti koju je zadao Regatni odbor natjecateljima. Riječ je bila o obaveznom prvom kratu i nekorištenju spinakera. foto: Hrvoje Duvančić – www.regate.com.hr Uvjeti na moru su malobrojnoj publici uskratili pogled na više atraktivnih situacija u predstartnim nadmudrivanjima. Uglavnom su se jedriličari držali na sigurnim udaljenostima jedni od drugih, ali svejedno su se desila dva manja sudara. U jednom je ekipa Gibanca udarila jedrilicu Panja i zaradila pola kaznenog boda, dok su u drugom incidentu Panji imali bliski susret s brodom RO-a. Tek nakon 15 sati bura malo slabi i podižu se kompletna glavna jedra, a u posljednja dva odjedrena flighta dozvoljava se i upotreba spinakera. Ali unatoč svim pokušajima ostaje neodjedren posljednji match prvog Round Robina. Vodeća ekipa na kraju dana su Panji s impresivnim 100 postotnim učinkom! Iza njih petak završavaju danci s 83% i domaćini iz WSC-a sa 67%. Sutradan jedriličare dočekuje prekrasan sunčan dan, ali s minimum vjetra. Odmah nakon izlaska na more, po laganom maestralu, uspijeva se samo završiti započeti Round Robin. Jedini potez koji je tada RO-u ostao na raspolaganju bio je izlazak kroz kanal Sv.Ante i prebacivanje regatnog polja pred Jadriju. To se već za vrijeme prolaska pored tvrđave Sv.Nikole pokazalo izvrsnim potezom jer je maestrala bilo više nego dovoljno za nastavak regate čim se postave bove. S obzirom na količinu vjetra odlučeno je da se drugi Round Robin jedri do kraja dana, bez prekidanja i započinjanja finalnog ciklusa. Jednako tako je i vremenska prognoza obećavala dovoljno vjetra i u nedjelju, pa nije bilo potrebe za forsiranjem završnog dijela. Spomenuti prekid je bio opcija jer je u match raceu dozvoljeno da se prekine Round Robin na sredini, kad sve posade imaju jednak broj odjedrenih matcheva, a također je uvedeno i novo pravilo o polovičnim bodovima koje je iskorišteno u ovom slučaju. Naime, maestral koliko god je bio dobar dok je puhao ipak je sa smirajem dana počeo smanjivati svoj intenzitet. Uspješno se kraju privelo 8 flighteva, a neodržanih ostaju tri (u stvari dva i pol, jer je u kombinaciji 7 posada posljednji flight samo s jednim matchem). Da bi se dobilo konačno bodovno stanje za formiranje finalnih parova trebalo je usporediti tablice prvog i drugog Round Robina. U njima je trebalo pronaći matcheve u kojima su bili isti parovi i tu se pobjednicima dodjeljivalo za pobjedu po pola boda umjesto dotadašnje upisivanih jedinica. To je razlog malo neobičajenijoj brojevnoj slici koja se može vidjeti u rezultatima. U odnosu na petak, redoslijed se promijenio samo po pitanju vodećeg dvojca. U posljednjem subotnjem matchu susreli su se upravo Panji i Downhill Sailing Team, uvjerljivo najbolje ekipe regate. Ovaj put je pobjedu odnijela danska ekipa i tako se bodovno izjednačila s murterinima, ali kako su klinci iz Danske bili bolji u kasnijem dvoboju po pravilima preuzimaju ulogu lidera na bodovnoj ljestvici. foto: Hrvoje Duvančić – www.regate.com.hr Nedjeljno jutro je bilo jednako subotnjem i regata se odmah nakon napuštanja veza uputila prema Jadriji. Nije više bilo maestrala, već je puhalo lagano oštro. S obzirom da se nije očekivalo značajnije jačanje vjetra tijekom dana program je skraćen na minimum. Za pobjede u King of the Castle srazovima bila je dovoljna samo po jedna pobjeda, dok su se polufinala i finala jedrila na dvije pobjede. Prvi match derbija začelja imali su 6. i 7. s rang ljestvice. Kao bolje plasirana, posada PFST-a je u match ušla pod žutom zastavicom, odnosno s desne strane s mogućnošću dočekivanja protivnika na favoriziranim desnim uzdama. Protivnička ekipa, s Tomom Stipanovićem na kormilu ulazi s lijeva, s plavom zastavicom i u zanimljivom nadmudrivanju po vrlo laganom vjetru starta s par sekundi prednosti. Cijelu prvu orcu i prvu krmu jedre jedni blizu drugih, izmjenjuju se u vodstvu, ali u posljednjem duelu, Stipanović iskorištava preklapanje s kojim iizgurava Bušićevu ekipu dovoljno daleko od željene rute da se uspije prvi spustiti do bove od krme i u drugu orcu ući sa značajnom prednosti koju ne ispušta do kraja. U drugom matchu iz ciklusa King of the Castle, Stipanovićevu ekipu dočekala je petoplasirana posada, slovenci iz Gibanca tima. Na nešto kraćem regatnom polju mnogo iskusnija posada iz Slovenije nije dala puno šanse našim mladićima. Od početka do kraja dvoboja imali su inicijativu i ostvarenu prednost su uspješno održavali do kraja plova. Nakon što se ovako razriješio redoslijed od 5. do 7. mjesta ostalo je još da se odjedre polufinalni matchevi. Po pravilima je vodeća posada izabrala svoje protivnike, a i ovaj put je bilo kao što se to najčešće radi, izabrali su četveroplasirane slovence iz posade Eureke. U drugom matchu su jedrile preostale naše dvije posade. U oba polufinala rezultat je na kraju bio po 2:0., a u finale su otišli Rameša i Kjaer, dok su se za treće mjesto nadmetali Smolić i Rajar. Jednaki rezultati, po 2:0, su bili i u posljednja dva flighta. U srazu za prvo mjesto uvjerljiviji su bili murterini, dok je Smolićeva ekipa odnijela pobjedu za treće mjesto. Osim titule apsolutnih pobjednika European Match Race Tour - stop Šibenik, posada Panji ovjenčala se i titulom prvaka Hrvatske za 2019. godinu, dok su drugoplasirani završili momci iz Šibenika, a na trećem i četvrtom mjestu su posade predvođene Tomom Stipanovićem i Tonijem Bušićem. foto: Hrvoje Duvančić – www.regate.com.hr Nakon ove regate EMRT se nastavlja na još šest regata po slijedećem rasporedu: Tivat (Crna Gora), Neusiedl See (Austrija), Limano (Rumunjska), Gothenburg (Švedska), Swinojuscie (Poljska) i Ledro (Italia), a finale za 2019. godinu će ove godine biti po prvi put u Šibeniku. Rezervirani termin je 4 - 6. listopada, tjedan dana prije seniorskog Europskog prvenstva koje će se jedriti u istom akvatoriju. READ MORE

A LONG TIME COMING How Client Stephen Jones Won The 2018 Shark Worlds Stephen shares how he and his crew, comprised of North Sails expert Geoff Moore and Breck McFarlane, took home the 2018 Shark World Championships in Kingston this past August. While the crew had minimal amount of training together before the Worlds, the crew was able to come together in tough conditions and sail smart. That said, the crew did do a lot boat prep work and preventative maintenance to the boat before the event started after they arrived in Kingston. Included in this was time spent mast tuning, specifically individual shroud tuning matrix, which Moore says contributed to their success. The maintenance continued throughout the event, each day before and after racing; allowing them to ensure the boat, the rig and the sails were in the best condition for racing. Tell us about how the journey to the Worlds and what steps you took to ensure success? I got to Worlds because my brother said, “I can't make it, but you can take the boat if you want.” He started a new job, and he didn't have any vacation time. So I said, “Okay, great!” and I immediately contacted Geoff and I said, “Geoff, do you want to do the Worlds?” And he said, “Sure, I'm in.” Then we recruited Breck McFarlane who has also done lots of different Shark events with us. And I've raced with him on J/22s and he raced on my J/22s. How were the conditions in Kingston? Usually it can either be raging winds or light air. It blew hard all week. Moderate on the last day, but we were on the jib for, I think, the first four days. The distance race, the squall came through where, reportedly, the Kingston Yacht Club's weather station reported 37 knots. For the first six races we had nothing worse than a three, so we were looking pretty good. Then we won the distance race, more just by keeping our heads together in the squall, and then for Friday, the last day of the event, we just kind of lifted the foot off the pedal a bit. I think we had a 6 and an 11, then we dropped the 11. It was an 11 and then a 6. Tell us about the squall and the distance race more. We actually changed from the Blade to the Genoa, that kind of moderated halfway through the race, and then we dropped to the low mark and we went back to Genoa, cause that's what was hinked up, the squall came through and it jumped from 18 to 38 knots. Boats were wiping out all around us. One guy went bare-headed and one guy dropped main and jib just to ride out this storm. Meanwhile Geoff was able to keep the boat going, keep the boat upright. And he told me to do something that I would not have done; he said, “Let the jib out.” I said, “Okay, are you sure? He says, “Yeah!” and then he said, “Let it out more, more.” Like, I let it out a meter, a meter and a half. I just thought, “That can't be right.” But we ended up actually still making progress upwind, where everyone else was basically just being bumped backwards, or sideways. we went from 8th or 9th in that race to winning it. North Sails expert Geoff Moore recalls the distance race was 4.5 hours and required the team to switch from little jib to big jib upwind (bare handed). Moore said "When the squall came thru most people left jibs over trimmed so they couldn’t fly their mains. We let out the main then eased the genoa so we could fly both sails at the same time." In addition to expert boat handling in the windy conditions, Moore also doubled up on battens in the mainsail to allow for better control, going so far as to "hand stitch battens into pocket." How would you say the sails have contributed or have they contributed to your success over the years, especially at the Worlds? We've always been loyal with North and I just think that the Shark sails won't let you down, they're known commodities, there's nothing radical about them. I had North on my Shark, well, I had actually a mixed inventory, but I came 2nd in the '06 Worlds, which is a very light air event. It's like how back in the day they'd used to say that no one would get fired for choosing IBM. You're not going to go wrong choosing North. Moore shares how “Our jib fit the boat beautifully” and the conditions required them to trim their sails perfectly throughout racing. For more information on our Shark products and how you can win the next Worlds, check out our inventory and contact your local experts today! READ MORE

CONDICIONES ESPECIALES PARA VELAS ENTREGADAS EN MARZO Si estás pensando en actualizar tu inventario de velas, ahora es el momento. Pide ya tus nuevas North Sails y recíbelas en marzo con magníficos descuentos. Las oportunidades están para aprovecharlas. En North Sails entendemos la inversión que supone actualizar un inventario de velas y por eso ofrecemos condiciones especiales cuando nuestras velerías disponen de mayor capacidad para aceptar pedidos de entrega inmediata. Si encargas ahora tus velas North Sails en tejidos NPL o NPC podrás beneficiarte de un suculento descuento y recibirlas en marzo. Y si lo tuyo es el 3Di, pregúntanos cómo equipar tu barco con las velas con mejores prestaciones y durabilidad del mundo. Te sorprenderás. Utiliza el código MARZO al realizar tu pedido y conseguirás condiciones especiales. Contacta con tu agente North Sails o pídenos presupuesto sin compromiso en info@es.northsails.com READ MORE

DINNER IS ON US We're Swapping Sails For Spatulas At The February Meeting READ MORE

WILL WELLES J/24 CLASS LEADER Two-time World Champion Loves to Share His Tricks © Chris Howell As a double world champion in the J/24, Will Welles has made good use of all the lessons learned over the years. “It’s pretty different than a lot of other boats,” he admits, adding that having a genoa changes how the boat is sailed (and tuned) compared to other small keelboats. Then he passes along a few other tips as well, because even during a winter office-bound interview he can’t resist sharing his knowledge. Favorite job, favorite boat Now based out of the Portsmouth, RI loft, Will learned to sail as a kid on Maine’s Mount Desert Island. “We always had a lot of boats around our place and were always fixing boats and working on boats,” he remembers. He sailed J/24s on and off but didn’t “fully get into it” until high school. After college, he bought a J/24 cheap and fixed it up himself. “I just like driving boats,” he laughs. “One of my favorite jobs ever was working on the dock crew at Hinckley’s as a high schooler. I basically drove boats all day, in and out of the lift, to the dock, to the mooring. Powerboats, sailboats, whatever. I just loved it.” As for the J/24, one aspect he enjoys most is the five person team, he says. “It really is a little big boat, and you get on the road with a crew that you like. It’s fun on the water. It’s fun off the water. And I’ve been doing it a long time. It’s kind of what got me into all this with North Sails.” Since his first job at North in 1997, Will’s worn a lot of hats. “I would sell big boat cruising and racing sails. I sailed a lot of events in larger boats, but always did the one design. That’s what I focus on now, one design sailing and selling.” In addition to the J/24, Will also sails Etchells, J/70s, Shields, and IODs. “I’m a strong believer in sailing what’s in your backyard, and the two biggest classes here in Newport are J/24s and Shields.” © Chris Howell Inventory Update North’s J/24 inventory has proved itself by winning the past five Worlds, but Will says “We’re always looking at different things. A lot of things have been tried numerous times over the years. We feel pretty happy with the upwind sails, the main, genoa, and the jib.” There are two genoa options, and he says most people choose the DX7TT genoa, which excels in waves. But “they’re both good,” he clarifies. “You can’t go wrong. We usually tell our clients to stick with the genoa that they’re used to using.” For spinnakers, most people buy the FR2. “We’ve worked on that quite a bit,” Will says. “It’s a full radial sail and it’s great in zero to 40. So that’s definitely the sail of choice.” Spinnaker design has evolved a lot over the last several years, he adds, “So that’s one sail we’re working on. We haven’t found anything better than the FR2 yet, but we’re still trying… always looking to make sure we’re providing the best product possible.” Number one J/24 trick Why does Will keep coming back to the J/24, even after winning two Worlds? “I like that it is a super technique boat,” he says. “Once you learn the little tricks, it can be pretty good.” Asked for specifics, Will talks first about sail trim. “You really overtrim the main to get headstay tension once you’re going. There aren’t many boats where you trim the main that hard, so that’s a big thing.” And his number one trick? That’s a question he gets quite often at regattas, so he has a quick answer. “The biggest thing is to get comfortable with sailing the boat flat—once you do that, you really have something. The helm feels awful, but it’s the key to getting upwind the fastest. So you gotta go out there and practice it and get comfortable with it.” © Chris Howell Dock talks and helping customers Will does dock talks at most big J/24 regattas, because he feels so strongly that sharing information is a big part of keeping classes going. “You gotta put back, especially into classes that have been good to you. It’s good for the class. It’s good for North Sails.” And even beyond the call of duty, Will says he enjoys helping people get faster—especially when a customer is actively taking notes. “That’s what you want to see when you’re standing up there, putting the time in. It’s good.” So, thanks to his sharing ways, all of Will’s customers can make good use of the lessons he’s learned as well. Read more about Will’s 2018 Worlds victory © Chris Howell READ MORE

Racing all over the world, here's what she had to say about her experience and goals in her sailing career so far.  READ MORE

Rendez-vous au SuisseNautic de Berne du 20 au 24 février SuisseNautic, le plus grand et plus important salon national du nautisme et des sports nautiques destiné au grand public, a lieu tous les deux ans. Du mercredi 20 au dimanche 24 février, votre équipe North Sails vous accueillera dans la Halle 3.2 sur le stand E02. Nos collaborateurs seront à votre entière disposition pour répondre à vos questions, échanger sur votre saison passée et celle à venir, vous faire découvrir nos nouveautés ou encore vous faire profiter de nos "offres spéciales salon". Horaire et billetterie: Cliquez ici pour en savoir plus et acheter vos billets d’entrée. N'oubliez pas de contacter nos experts afin de bénéficier d’une réduction sur votre billet d’entrée ! Gammes 2019: Découvrez déjà nos gammes de cette année en cliquant ici. Nous vous souhaitons une belle saison de ski et nous nous réjouissons de vous accueillir à Berne! READ MORE

Get The Most From Your J/105 Your next regatta is just around the corner. Is your team ready? Our J/105 Tool Kit will help. Created just for J/105 sailors, by our expert team. #NSVictoryList There is no better performance test of a one design sail than the results it produces. In 2018 alone, North Sails J/105 inventories helped teams win regattas all over the US. Tips From The Champ Champion Terry McLaughlin shares some tips that helped team Mandate win the 2018 North Americans. Downwind Tips & Tricks How to sail as deep as possible while still keeping your speed up. Before your next regatta, read this downwind manual from expert Will Keyworth. Define Your Speed Pulling all the pieces together can be challenging. Our J/105 Speed Guide will help you leverage our expertise to make the most of your sailing. Fine Tune With North Find your groove. Get your numbers. Be confident in all wind conditions. After countless hours of sailing, sail testing, and competing in the J/105, our championship winning sails will get you up to speed quickly. Working With The Best Our J/105 sails deliver the best results for our clients. Contact your local expert and join us at the front of the pack. READ MORE

WHY IS HEADSTAY SAG FAST UPWIND IN LIGHT AIR? How Headstay Sag Affects Everything From Speed To Point Sailboats with headstay sag often point higher and maintain boatspeed better in light-air conditions. One Design expert Tim Healy describes the rewards and the risks. Many sailboat classes limit the number of jibs that a boat may carry, and some classes allow only a single jib. These limitations challenge competitors to find ways to maximize power in light air. One of the key methods to power up a sail is to induce sag in the headstay, also known as the forestay. Headstay sag on a sailboat is the distance between the midpoint of the headstay if it were perfectly straight and the actual midpoint while sailing. The best way to estimate this measurement is when sailing upwind, sight up the forward side of the headstay and note how far the midpoint of the headstay has sagged when compared to the mast. When the headstay sags, it not only sags to leeward but also sags aft, which puts the luff closer to the leech, thereby adding depth to the jib. How to Increase Headstay Sag The key controls for manipulating headstay sag are shroud tension, mainsheet tension, and in some cases, headstay length. You would think that headstay length would be the primary variable, but that’s only the case on boats with keel-stepped masts, such as the Farr 40, Etchells, and Shields, that limit range of mast movement at the mast step and deck partners. On those boats, lengthening the headstay by easing the forestay turnbuckle or adding extra toggles can be an effective way to increase sag. In some classes, such as the J/24, a maximum headstay length is prescribed, limiting this adjustment. And on almost all classes, there are good and practical reasons not to overdo the lengthening of the headstay, including a negative effect on mainsail shape. In light air, the number one adjustment for headstay sag on boats with either deck-stepped and keel-stepped masts is varying the shroud tension. More tension effectively pulls the mast aft—assuming the chainplates are aft of the mast. If the lower shrouds are farther aft, they will have the most effect; on boats with aft-swept spreaders (J/24, J/70, Melges 24), the uppers will have more effect. The other way to induce headstay sag is to minimize mainsheet tension. If the mast is stiff, trimming the mainsheet will quickly increase headstay tension and reduce sag. Ideally, in light and puffy conditions, when you ease the mainsheet in a lull, you’ll see the headstay sag to leeward, powering up the sail. If you don’t get that response when you ease in a lull on a Thistle, Lightning or J/70, your shroud tension is too tight. One other way to check that your shroud tension isn’t too tight is to sight up the aft side of the mast while sailing upwind. If you see a small amount of sag to leeward in the middle of the mast, that’s a good sign that your shroud tension is right. Easing off the rig isn’t the only way to increase headstay sag. On a Lightning, you can add a block behind your mast at the deck. On a Thistle, you can put wedges under the mast butt. On a Snipe, you can pull the mast forward at the partners. On a J/24, you can move the mast butt aft. And on an Etchells, you can do any or all of the above. When you sag the headstay, the maximum draft in your jib moves forward. To compensate and keep the draft aft, ease halyard tension, which also creates additional power. If you increase headstay sag but the halyard remains too tight, you’ll get a big “knuckle” in the front of the sail and an entry that’s too deep, so you won’t gain the overall power you’re seeking. You should see horizontal wrinkles in the front of the sail. What Headstay Sag Does to Sail Shape When headstay sag is increased, the headsail becomes deeper and more powerful. If your boat is under-powered, this can make a big difference when it comes to developing speed, especially in choppy wave conditions. The other major effect of increased headstay sag is that it effectively rotates the middle sail, changing angle of attack. The mid-luff of the sail moves to leeward as well as aft. At the same time the mid-leech rotates slightly inboard, similar to the effect of weather-sheeting, which increases pointing ability. Once the boat becomes overpowered sag can become a liability, which is why tuning guides usually call for more rig tension as the wind increases. What Too Much Headstay Sag Does To Sail Shape You can have too much of a good thing. With too much headstay sag the leech will rotate inboard too far, becoming extra sensitive to sheet tension and stalling too easily. Equally problematic, the entry angle becomes too extreme; when you bear off to rebuild speed, you have to sheet out too much to power up the sail. Another problem is that the angle of attack varies too much at the front of the sail from top and bottom. You may also see a knuckle in the front of the jib, regardless of halyard tension, and the middle of the sail becomes too flat, without generating significant power. Light Air and Flat Water Let’s review how this should work in two light-air conditions, starting with flat water. Here, it’s important to create power in the sail plan, and sagging the headstay is the easiest and most direct method to create depth in the jib. This creates a scenario where the middle of the jib luff has a better angle of attack to the wind and because of that angle of attack and the inboard rotation of the mid-leech, you will be able to point slightly higher without luffing or losing flow over the front of the jib. When you have this set up correctly, it is as important as ever to make sure the jib leech tell tales are flowing 90 to 100 percent of the time so that the airflow stays attached to the jib. That said, it is OK (and we actually encourage you) to test maximum trim by sheeting in periodically until you see the jib-leech telltales stall slightly, then ease out until fully streaming. This is your jib sheet trim range, which on some boats may be as little as 1” of sheet. It is important to stay on top of your rig tensions in these conditions and find the settings that work best for your driving style. In addition, make sure you have some mast side sag at the spreaders, which is a signal that the mast is free to bend forward as well as to leeward. Forward bend creates a flatter main that can be sheeted tighter without stalling the leech, which will also help pointing ability. Light Air and Chop When chop is introduced into the picture, a loose rig is still good, but you may find that the rig will pump too much as the waves get larger. This is normal, but in order to temporarily stabilize the rig for a set of bigger waves, pull on enough backstay to snug it up. This should minimize the pumping of the rig and headstay and keep a more consistent sail shape through the chop. As soon as the patch of chop is over, release the backstay to put more sag back in the headstay. On boats that employ in-haulers or weather sheet the jib to increase pointing ability, be careful not to overdo it. The jib leech can become prone to stalling, which can be particularly slow in waves. We encourage you to experiment, not only with your headstay sag but with your sheeting technique. Keep notes of what works and what doesn’t, and you’ll quickly master the art of headstay sag. READ MORE

NORTH CLIENTS SWEEP J/70 DIYC WINTER SERIES Versatility of North Designs Prevails. Congratulations Team Savasana! Series winners at full power in Tampa Bay .©Photoboat.com Sailing at the Davis Island J/70 Winter Series #3 was beautiful once again! The wind was strong out of the northeast on Saturday, 14-18 knots and a balmy 76 degrees. Sunday was just as nice with winds 8-14 knots and a high of 78 degrees. The race committee did a fantastic job to get the 50-boat fleet a total of seven races over the course of two days, making for a competitive weekend of racing. Congratulations to Brian Keane and team Savasana for winning the weekend with four bullets on the scoreboard. The result secured Savasana the J/70 Winter Series overall victory. Keane used the North XCS-2 mainsail, J-6 jib and the AP-1 spinnaker. We are especially happy for our clients finishing 1,2,4,5, taking the top two podium spots over the course of the series. When we asked Brian for his comments on the weekend, here’s what he said: “We saw a variety of conditions throughout the Davis Island Winter Series which put a lot of demands on the sails. The versatility of North sails was key to our success in Davis Island. We could power up in the light air with flat sea state without inducing excessive drag. We could also quickly and efficiently de-power in windy conditions. Bottom line, we like working with North Sails because the versatility of their products allow us to consistently achieve top results.” Our experts Tim Healy and Will Welles attended all the three events, helping clients and sharing everything they learned throughout the series. North Sails is a proud sponsor of the Davis Island Winter Series and the Friday Porch Series. Our team is happy to help competitors to get up to speed so they can be ready for the racing. Here are Tim and Will’s tips from the event #3: Tim’s Tips: Acceleration Off The Starting Line Preset controls: Set the backstay, outhaul, cunningham, and jib halyard before the start to minimize movement while boat is accelerating at start. Mark sheets and know the powerup and full speed settings for that condition: Take notice of your marks on both the windward and leeward jib sheets, as well as main sheet. This is done prestart, always leave enough time to get to the race area and sail most of first beat to check marks, get heading numbers, and gauge speed with other boats. When the boat is going well and trimmed for speed, make note of the position of your marks. Acceleration Sequence: Keep the vang loose for pre-start and only pull vang-on after you are fully sheeted in. Your crew should hit the rail and hike. Try not to move in for adjustments, if possible. Crew should quickly give speed and height feedback to driver and main trimmer. Main trimmer makes the final trim on the main and the jib, while the forward two crew stay out on the rail keeping the boat steady. Skipper should focus on accelerating and getting the boat up to max speed right at the start. Pointing will come after target speed is met. Will’s Tips: Shifting Gears In Puffy Conditions De-powering Sequence: Drop the traveler down. Pull backstay on. Vang sheet. Pull main cunningham on. Pull jib halyard on if wind speed has increased on average. Weather sheet off in the puffs. Pull back in the lulls. (In light to medium breeze we play the leeward sheet and leave the weather sheet on). The reverse of this sequence is used when we look for power. Main cunningham is the last thing we pull on and the first thing that comes off when looking for power. In a big lull we also ease a little backstay and bring the traveler up a couple inches. The key is to get good wind information from the crew on the rail, so you can prepare for the puff. I like to hear about the big puffs and the long lulls, which allows me to keep the boat at a constant angle of heel, making it easier to maintain maximum boat speed. In case you missed our notes from event one and two: Tips from Series Opener | Takeaways from event #2 Get ready for the Spring sailing season with the fastest J/70 sails from North. Contact your local J/70 expert today! Will Welles’ New Wave, 2nd Place. ©Chris Howell Greiner Hobbs’ Dark Horse, 9th place. ©Chris Howell Douglas Strebel’s Black River Racing. ©Chris Howell READ MORE

ORC PLANOVI ZA JADRAN U 2019. foto: Hrvoje Duvančić - www.regate.com.hr Udruga ORC jedriličara u nastojanjima da još više populariziraju sustav po kojem rade su za sezonu 2019. pripremili još jednu novost. U stvari riječ je o malo razrađenijem pristupu lanjskoj inicijativi, a u svakom slučaju o akciji koja bi mogla biti zanimljiva još širem krugu jedriličara na krstašima. U sezoni 2018. pokrenuta je rang ljestvica koje je rangirala jedriličare koji su bili sudionici na deset regata koje su se bodovale po ORC Club sustavu razvrstanja, regatama koje nisu u sklopu D-Marin CRO ORC Cup-a koji se jedri po ORC International-u. Osnovna ideja je bila povezati regate koje jedre na duljim rutama i da po mogućnosti budu "offshore" što je više moguće. Kako takvih regata koje bi u potpunosti zadovoljavale tu definiciju nije bilo previše, a i u cilju bolje promocije odlučeno je da se uključe i regate koje se već dulje vremena jedre po ORC-u i na kojim se generalni pobjednik dobiva iz ove skupine. Tako se dobila lista na kojoj su se našle Jadranska, Komiška, Južnodalmatinska, Trka oko Krka, Regata 1000 otoka, Galijola, Viška, Regata oko Dugog otoka i Jabuka. Iako je u nazivu ove ljestvice stajalo "offshore" ipak zbog Komiške, Južodalmatinske i Viške to nije bila baš "čista" ljestvica regata koje se jedre na stvarno dugim rutama. Unatoč tome, cijela akcija je dobila pozitivne reakcije jedriličara uz određene sugestije da se još više približi većini koja ipak nije toliko zaražena višednevnim jurcanjima na dugim relacijama. Zato se unutar Udruge ORC jedriličara ove godine odlučilo formirati i tzv. "inshore" ljestvicu regata koje se jedre po ORC Club-u, a za ekipe koje više vole otvoreno more da se pročisti njihov popis regata. Izvorni popis dugih regata skraćen je za spomenute tri regate koje se u principu ne uklapaju u ovaj koncept, a dodana je jedna novost iz Kvarnerskog akvatorija. Članovi YC Croatia iz Opatije su odlučili napraviti još jednu pravu zimsku dugu regatu, kombinaciju Jabuke i Sv.Nikole. Ruta je vrlo jednostavna... start ispred marine Ičići, baze YC Croatia, pa oko otočića Suska i natrag u Ičiće. Promotivno izdanje regate će biti oglašeno za posade, a ovisno o interesu jedriličara organizatori razmišljaju i o otvaranju regate za dvojce. Ova regata bi bila posljednja za offshore ljestvicu u 2019. dok cijeli popis izgleda ovako: Datum Regata Okvirna duljina 26.04 - 01.05. 13. Jadranska regata 220 NM 20.09 - 22.09. 6. Trka oko Krka 55 NM 22.09 - 25.09. 6. Regata 1000 otoka - 1. etapa 280 NM 26.09 - 29.09. 6. Regata 1000 otoka - 2. etapa 280 NM 27.09 - 29.09. 37. Galijola 80 NM 25.10 - 27.10. 5. Regata oko Dugog otoka 110 NM 08.11 - 10.11. 16. Jabuka 90 NM 22.11 - 24.11. Susak za posade 100 NM Sustav bodovanja ostaje jednak sustavu iz 2018. i količina skupljenih bodova najviše ovisi o duljini rute na kojoj se regata jedrila. Ideja je jednostavna, što je regata dulja veća je vrijednost osvojenog mjesta. foto: Hrvoje Duvančić - www.regate.com.hr Tri regate koje su maknute s offshore ljestvice prebačene su na inshore ljestvicu. Uz njih su dodane još četiri koje su također popularne među našim jedriličarima, a neke od njih imaju dugu povijest bodovanja po ORC-u. Također se nastojalo da se zastupe regate po cijelom Jadranu, pa ih ima od Kvarnera do Dubrovnika, a za razliku od gornje tablice u kojoj se može primijetiti da su regate većinom smještene u jesen, inshore su raspoređene od proljeća do jeseni: Datum Regata 01.03 - 03.03. Karnevalska regata 06.04 - 06.04. Gladuša 2019 27.04 - 28.04. 17. Zlarinska regata krstaša 24.05 - 26.05. 28. Komiška regata 02.08 - 04.08. Južnodalmatinska regata 13.09 - 15.09. Lošinjska regata 18.10 - 20.10. 75. Viška regata Princip bodovanja je drugačiji nego kod navigacijskih regata. Temeljna prednost koju će neka od regata imati je broj sudionika prijavljenih po ORC-u. Što ih bude više vrijednost bodova za osvojeno pojedino mjesto će biti veća. Formula po kojoj će se taj element uzimati u obzir izgleda ovako: BROJ BODOVA = 100 + 300*LOG(BROJ SUDIONIKA NA REGATI) - 200*LOG(MJESTO OSVOJENO NA REGATI) Istina, nije baš uobičajeno logaritme i slične matematičke funkcije viđati prilikom slaganja rang ljestvica ali treba napomenuti da gornja formula nije izmišljena za ovu prigodu već je preuzeta od "modelara" koji ovakav način bodovanja za svoju rang ljestvicu koriste već više od desetljeća. Prvi bodovi će se podijeliti već za mjesec dana na Karnevalskoj regati u Biogradu i to će ujedno biti prva regata u 2019. koja je uključena na jednu od ORC ljestvica. Obje ljestvice će bodove dodjeljivati jedrilicama, a ne kormilarima. Drugim riječima, otvara se prostor kalkulacijama i lakšem planiranju osvajanja vrha ljestvica, pogotovo ako ekipe koriste jedrilice iz chartera. Element vlasništva je ovdje posve nebitan, a nije loše spomenuti da je velika većina jedrilica u charteru je uredno premjerena i posjeduje potrebni certifikat. A za kraj je ostala bazična ljestvica za čije osvajanje jedre sudionici D-Marin CRO ORC Cupa. Kao što se iz imena vidi, sponzor ovog natjecanja je još uvijek D-Marin koji i dalje sponzorira regate za Cup koje se jedre u nekoj od njihovih marina, a to bi u principu bile sve osim Uskrsne regate koja je pod kapom PBZ Leasinga. foto: Hrvoje Duvančić - www.regate.com.hr Sponzorstvo D-Marina se i dalje koristi za smanjivanje troškova održavanja regate, pa su svi oni koji uplate godišnju članarinu u Udruzi ORC jedriličara i dalje pošteđeni startnine na regatama (osim Prvenstva Hrvatske gdje participiraju s dosta manjim iznosom). S druge strane od ove godine na Uskrsnoj regati se ponovno plaća startnina koje također nije bilo u posljednje vrijeme. Također više neće biti ni Open skupine, već će se jedriti isključivo po ORC-u, tako da ako planirate do Hvara u travnju provjerite da li imate valjan ORC certifikat! Broj regata koje će se ove godine jedriti za Cup je smanjen za čak dvije. Dosadašnja praksa je pokazala da regate koje se organiziraju u rujnu i listopadu imaju veliki problem s okupljanjem dovoljnog broja posada koje su najčešće spriječene obavezama u charteru. Tako su u službenom kalendaru ostale samo proljetne regate, a na jesen će se jedriti samo Prvenstvo Hrvatske: Datum Regata 09.03 - 10.03. Zadar ORC Cup 10.04 - 13.04. 23. Uskrsna regata 03.05 - 05.05. Šibenik ORC Cup - Pre worlds 13.11 - 15.11. Prvenstvo Hrvatske S obzirom na ovogodišnje ORC Svjetsko prvenstvo koje će se jedriti u Šibeniku od 31. svibnja do 8. lipnja u Udruzi se nadaju značajnijem porastu broja sudionika na regatama za Cup, dok bi se na Šibenik ORC Cupu u svibnju mogla naći međunarodna konkurencija na regatnom polju pored Zlarina. U svakom slučaju, bar po pitanju ORC-a, očekuje nas zanimljiva sezona! READ MORE

LOCAL SAILORS MAKE WAVES IN MIAMI, FL, USA © Martina Orsini / Star Class North Sails Ireland would like to congratulate Robert and Peter O'Leary for a fantastic result at the Star Class Junior World Championships in Miami. For this regatta Robert and Peter swapped positions in the boat with Robert taking the helm. Competition was extremely tough as it always is in the Star class but the Brothers just got better and better as they became more comfortable with their new roles winning the final race of the regatta. Imagine what they could have achieved with some real solid practice! Talking to Robert and Peter after the regatta they were quick to praise their boat speed generated in part by their North Sails. Peter has been a Star customer of North Sails since 2010 and has played a large part in developing the sails they are using today. To echo his own words, "once you have confidence in the kit it's easier to spend more time with your head out of the boat." Now straight after the Junior Worlds the Brothers are swapping back to their more familiar roles with Robert back in the crew seat for the Walker Cup and the MidWinters. North Sails Ireland would like to wish them all the best going into the final races of the Star midwinters today in Miami. We will be watching. Good Luck! © Martina Orsini / Star Class READ MORE

CODE VITORLÁK - FUTTATOTT ÉS ÉLES MENETEKHEZ „CODE” vitorláknak a specializált, gyors, lapos, betekerhető bőszeles vitorlákat nevezünk, amiknek a keresztmérete 50%-75%-a az alsóélnek. Ezek a vitorlák az Upwind orrvitorlák és a bőszeles vitorlák (spinnakerek/gennakerek) közé esnek. CODE vitorlák különösen hatékonyak a nagyteljesítményű egy- és többtestű hajóknál. A CODE Zero 75%-os keresztméretének köszönhetően, bizonyos osztályokban spinnakerként is felmérhető. A személyre szabott vitorlaformák, az elsőélre terhelő vitorlastruktúrának köszönhetően páratlan sebességet és stabilitást nyújtanak. 3Di CODE vitorlákban magas felbontású teherviselő szálak alkotják a szerkezet. A paneles vitorlák esetén a legoptimálisabb panelelrendezés, a választott anyagnak megfelelően. VÁLTOZATOK Code Zero (75% smg) spinnakerként felmérhető Code 70 (70-74% smg) bőszeles VMG Code 60 (60-69% smg) „Reacher” Code 50 (50-59% smg) „Tight Reacher” JELLEMZŐK • Helix Luff (Code Zero) • optiomalizált vitorlaforma • elsőélterhelésre tervezett struktúra • Soft Clew • állítható élkötelek • vitorlaszám, országjelzés • hitelesített felmérés • North zipzáras zsák OPCIONÁLIS • Helix Luff (Code 70) • Future Fibres Torquelite betekerős elsőél • SailKote Plus • egyedi grafika READ MORE

3Di ENDURANCE - GYORS, ELLENÁLLÓ, SOKOLDALÚ Föld Körül Vagy A Versenypályán 3Di Endurance a legellenállóbb változata a 3D formázott kompozit vitorláinknak. Az ENDURANCE az eredeti 3Di változat folyamatos továbbfejlesztése, ami legjobb teljesítményt a legnagyobb tartóssággal egyesíti. Az összes 3Di termék előnyét ötvözve az ENDURANCE vitorlákat egy speciális, felszíni gyantával, átitatott külső burkolat még ellenállóbbá teszi a külső, mechanikus behatások ellen (lobogás, hajtogatás, gyűrés, súrlódás és UV sugárzás). Sok vitorlázónak ez komoly előny, az enyhe súly és vastagság növekedés ellenére is. 3Di ENDURANCE ideális választás: • amennyiben a legfejlettebb túravitorlákat szeretné • ha tartós nagyteljesítményű versenyzésre is alkalmas vitorlát szeretne • egy szett vitorlát használna versenyzésre és túrázásra egyaránt VÁLTOZATOK + AJÁNLOTT FELHASZNÁLÁS ENDURANCE 760 : Ultra PE / Aramid ENDURANCE 780 : Ultra PE / Carbon / Aramid tavi túrázás, tengeri túrázás, tavi versenyzés, tengeri versenyzés, óceáni versenyzés, többtestűek ELÉRHETŐ VITORLATÍPUSOK standard nagyvitorla / átmenőlatnis nagyvitorla / árboc és boom betekerős nagyvitorlák / betekerős és nem betekerős orrvitorlák ENDURANCE ELŐNYEI • 3D formázott kompozit szerkezet • legellenállóbb 3Di vitorlák • meghatározó teljesítmény a tengeri vitorlák között READ MORE

CROSS-CUT - KÖNNYEN ELÉRHETŐ TARTÓSSÁG Mindennapi és Általános Használatra NPC Horizontál szabású vitorlákat nagy szakítószilárdságú NorDac Fill™ Polyester szövetből készítjük. North Sails már több mint 50 éve finomítja a NorDac anyagokat, jellemzőjük a lehető legsűrűbb szövés, a jó alaktartás, a kiemelkedő ellenállás a mechanikai behatásokra és a magas UV ellenállóság. NPC CROSS-CUT ideális választás: • olyan csúcsminőségű vitorlát szeretne, amelyek megfelel a költségvetésnek • magas élettartamú vitorlát szeretne • könnyedén, egyszerűen vitorlázna VÁLTOZATOK + AJÁNLOTT FELHASZNÁLÁS NorDac Fill Low Aspect (LA) : 2.5/1-nél kissebb magasság/szélesség arányú vitrolákhoz tervezve NorDac Fill high Aspect (HA) : különösen alkalmas magasabb, keskenyebb vitorlákhoz. taví túrázás, tengeri túrázás, óceáni túrázás, klub versenyzés ELÉRHETŐ VITORLATÍPUSOK standard nagyvitorla/átmenőlatnis nagyvitorla/árbocba és boomba tekerős nagyvitorlák/betekerős és nem betekerős orrvitorlák NPC CROSS-CUT ELŐNYEI • magas minőségű dacron szövet • könnyen kezelhető • versenyváltozatok sebességre és tartósságraoptimalizálva • széles spektrumú szélviszonyokra • horizontál szabással, a hátsóéllel párhuzamosra igazítva a legalacsonyabb nyúlás érdekében READ MORE

NPL SPORT - VILÁGVEZETŐ LAMINÁLT ANYAGOK Verseny Paneles Vitorlák NPL SPORT vitorlákat a nagyteljesítményű NORTH SAILS Xi Race laminált anyagból készítjük, amit a világ legfejlettebb gyártósorán állítunk elő. Az eredmény: kivételes minőségű kötés, minimális agasztóanyag felhasználásával. Az iparágban egyedülálló eXact™ eljárás lehetővé teszi, hogy gyártás közben módosítsuk a teherviselő szálak irányát a teherviselő hálón belül. A precíziós eXact eljárás előnye a hagyományos fix szövésű hálóval szemben, az anyagba fektetetett kevesebb, de hatékonyabb teherviselő réteg. NPL SPORT ideális választás: • osztályelőírás nem engedi a 3Di technológiát • kedvezőbb árú vitorlákat szeretne versenyzéshez • magas teljesítményű ”CODE” vitorlákhoz VÁLTOZATOK + AJÁNLOTT FELHASZNÁLÁS Xi RACE : tiszta Mylar külső rétegek, fekete Twaron/Technora® teherviselő szálak, eXact X-háló Xi RACE T : kiegészítő egyoldalas taffeta Xi CODE : könnyebb (0.75mil) külső film Xi CODE T : kiegészítő egyoldalas könnyű taffeta one design/tavi versenyzés/tengeri versenyzés ELÉRHETŐ VITORLATÍPUSOK standard nagyvitorla / átmenőlatnis nagyvitorla / square top nagyvitorla / verseny orrvitorlák / CODE vitorlák NPL SPORT ELŐNYEI • vezető paneles vitorla a one design és klub versenyzésben • erősebb, könnyebb, kisebb nyúlás a többi laminált anyaghoz képest • egyedülálló mélynyomásos gyártósor, integrált eXact variálható hálókészítővel READ MORE

3Di NorDac - ERŐS, LETISZTULT , VARRÁS NÉLKÜL A Dacron Vitorla Újrafeltalálva 3Di NorDac egyesíti a kompozit 3D sablonon formázott technológiát a megbízható, tartós polyester szálakkal, amiket a vitorlázók évtizedek óta bizalommal használnak. Az eredmény egy innovatív vitorla, simább felülettel és permanens aerodinamikai formával. Az exkluzív gyártástechnológiának köszönhetően, magasabb teljesítményt lehet elérni a hagyományos teherviselő szálakkal. North Sails kifejezetten a kisebb és közepes méretű hajók számára fejlesztette a 3Di NorDac-ot. 3Di NorDac gyorsabb, könnyebben kezelhető, elérhető árú és nagyon tartós. 3Di NORDAC ideális választás: • értékeli a nagyszerű formájú vitorlákat • szeretné hajójából kihozni a legnagyobb teljesítményt • tartósságot és a kitűnő értéket várja • paneles szövet vitorláknál nagyobb teljesítményt szeretne VÁLTOZATOK + AJÁNLOTT FELHASZNÁLÁS 3Di NORDAC : 100% Polyester tavi, tengeri és földkerülő, kis és közepes méretű hajókra ELÉRHETŐ VITORLATÍPUSOK standard nagyvitorla/átmenőlatnis nagyvitorla/árbocba és boomba tekerős nagyvitorlák/ betekerős és nem betekerős orrvitorlák 3DI NORDAC ELŐNYEI • egy részből álló, 3D formázott kompozit vitorla • 100% polyester, a legtartósabb anyag • fehér szín, kiváló ellenállással a mechanikus behatásokra • változó anyagsűrűség, irány és rétegek a terhelések szerint • integrált latnizsákok, erősítések és reff struktúra • magas UV tűrés READ MORE

RADIAN - RADIÁL SZÖVÉSŰ FORRADALOM Alacsony Nyúlás A Szövetvitorlákban Saját szabadalmú NPC Radian egyedi vitorlaszövetünk, nem laminált polyester, radiál paneles konstrukciókhoz készül. A hosszirányú, egyenes szálak közé, speciálisan formázott keresztszálakat fonunk. Ez teszi lehetővé, hogy a vitorlákat radiál szabással, szofisztikáltabb panel elrendezéssel készítsük, mint a hagyományos horizontál szabásúakat. NPC Radiannal vitorlázók film és ragasztás mentesen élvezhetik a szabás előnyeit és az alacsonyabb nyúlást. NPC RADIAN ideális választás: • szeretné a polyester szövet tartósságát • szeretné a triradiál szabás fejlettebb szerkezetét, nagyobb formastabilitását • kis, közepes méretű verseny, túraverseny hajója van • one design osztályban versenyez, ahol előírás a szövet anyaga VÁLTOZATOK + AJÁNLOTT FELHASZNÁLÁS NorDac Radian : magas szakítószilárdságú polyester, szabadalmaztatott szövésminta, melemine impregnált bevonat NorDac Radian OLY : exkluzív „magas molekula tömegű” urethane „OLY” bevonat (One Design vitorlákon) tavi túrázás, tengeri túrázás, tavi versenyzés, tengeri versenyzés, one design és klub versenyzés ELÉRHETŐ VITORLATÍPUSOK standard nagyvitorlák / átmenőlatnis nagyvitorlák / square top nagyvitorlák / árbocba és boomba betekerős nagyvitorlák / betekerős orrvitorlák / nem betekerős orrvitorlák NPC RADIAN ELŐNYEI • polyester szövet bizonyított tartóssága • magas szakítószilárdságú polyester szabadalmaztatott szövéssel • magas ellenállás a mechanikai hatások és az UV károsodás ellen • one design verseny nyerő teljesítmény READ MORE

PREPARATION FOR THE SCOR REGATTA North Sails Charleston Is Always On Your Team 2018 SCOR Regatta 📸 Priscilla Parker The North Sails team in Charleston will be on hand to lend support to all teams in preparation for the the upcoming SCOR Regatta. Taking place February 15 - 17, all teams will have the support of local experts John Bowden, Tripp Fellabom and Ervin Grove as they prepare their crews and boats for the collegiate regatta. Kicking off on February 15th at 1pm in Carolina Yacht Club, the North experts will be available to provide guidance on crew handling, placement and maneuvers. | Notice of Race Carolina Yacht Club Sailing Center | Friday February 15th | 1pm READ MORE

NORTH U AT COLUMBIA YACHT CLUB Bill Gladstone Shares Advice on Tactics & Speed It was great to have our old friend & former Evanston resident Bill Gladstone back in Chicago at Columbia Yacht Club for the first of our winter seminars. In conjunction with CASRA and Columbia Yacht Club, our objective this winter is to give all involved sailors the opportunity to invest time in the development of their sailing knowledge base. "If nothing else, it helps keep the memory of warmer sailing days alive as we wait for the next season on the water. We are inspired when knowledgeable sailors let us know they came away with a few bits of clarification or a deeper knowledge of tactics at these events." We had 80+ participants on a cold, snowy Wednesday night for Bill’s introductory North U. survey seminar on “Tactics Tips & Go Fast Topics”. The North U courses take a full day, each discussing Speed and then Tactics, so Bill had his work cut out trying to fit as much as he could into two hours. Bill began his seminar with the “pyramid of success” for sailboat racing. Starting with a foundation of Boat Handling, he emphasized the importance of practicing with specific drills and tips on increasing proficiency of captain and crew alike. With better Boat Handling, you can then start to focus on increasing your Boat Speed, which in turn will allow you spend more effort on maximizing your Position on the race course. Sailboat racing is a bit like chess, in that the maximum enjoyment comes from mastering the mental aspects of the game; but you cannot get to that point until you first know how all the pieces can move! Those sailing components include boat handling, crew teamwork, boat & equipment prep, understanding sail shape & trim, steering, & more – all topics that are dealt with, in detail, at the full North U Speed course. Thank you, Bill, for a very enjoyable learning experience. We hope to see in March at another event! Upcoming events include: March 2: Chicago March 3: Milwaukee March 3: Chicago - CYC Monroe Meet'n'Greet March 13: Chicago - Chicago Mac Strategy Seminar READ MORE

STARTING STRATEGIES, SAIL TRIM + TUNING New Year, New Skills With Your Local Experts Wednesday March 20 | 6:00PM The margin between a mid-fleet finish and winning is often less than 2%. At our racing seminars, you will learn the fundamental concepts and nuanced techniques that can deliver your winning margin. Join North Sails experts Chuck Allen, Tim Healy, Will Welles, and Mike Marshall for a night dedicated to starting strategies, sail trim and tuning. RSVP today for this complimentary seminar, open to all boats, and join us in March at the Portsmouth, RI loft READ MORE

PARABÉNS A TODOS OS VELEJADORES NORTH SAILS PELOS RESULTADOS NO SEIXAL Na regata do passado fim-de-semana, o Francisco Uva e o Augusto Castelo Branco tiveram uma grande prestação e subiram ao podium como 2º e 3º classificados, respectivamente. Francisco Uva Photo Credits:Luis Fráguas Augusto Castelo Branco Photo Credits: Luis Fráguas As velejadoras Katharina Leite e Matilde Bandeira fizeram, também, um excelente trabalho! A Katharina conquistou o 1º lugar e a Matilde o 3ºlugar, em Feminino. Katharina Leite Photo Credits: Luis Fráguas Matilde Bandeira Photo Credits: Luis Fráguas Entre os onze primeiros classificados foram 6 os velejadores North Sails. Competiram com os modelos de vela R-1 o Francisco Uva e a Matilde Bandeira, com a R-2 o Augusto Castelo Branco, com a R-4 o Salvador Baptista-Fernandes e o Maxx de Groot e com a R-5 a Katharina Leite. Não podemos deixar de referir que o velejador Maxx de Groot está na sua primeira época de competição. Parabéns pelo bom trabalho! No final, o Francisco Uva consolidou, assim, a sua posição no ranking centro, mantendo-se no primeiro lugar da tabela. Agora é continuar a treinar com empenho, pois Vilamoura está mesmo à porta! Até lá, não deixem de nos consultar para mais informações sobre as North Sails. Photo Credits: Luis Fráguas Contacte-nos já hoje! Sail Fast and Good Luck! READ MORE

THE NEW NORTH SAILS LONG BEACH Your Team Has Moved To Long Beach. Visit Our New Location, Open Now North Sails is excited to announce the opening of our new loft in Long Beach, CA. Managed by local experts Bill Herrschaft and Zack Maxam, the North Sails loft previously based in Costa Mesa has moved operations to a new location: 5752 E 2nd Street, Long Beach, CA 90903. Open now, the new loft is ideally located in Long Beach, the racing hub of central California and is in close proximity to serve local clubs including Long Beach Yacht Club and ABYC. The new location will be convenient for sail pickup and drop off and service work on the extensive dinghy fleet in the area. Working in close partnership with North's West coast superyacht hub in San Diego, the majority of larger sails will be transported and serviced in San Diego where the extensive floor space is designed to handle any service needs. North Sails has a long history in the Long Beach area, stemming from the original location in the late 70's. The team is excited to return to the area as the new location allows full coverage and support for clients based in Marina Del Rey down through to Dana Point, with Long Beach as the central hub. "One of the many benefits for everyone in the relocation effort is that we can now provide customer service to a broader range of territory, and we have a great location for clients to visit and talk about their sails" - Bill Herrschaft, Loft Manager The new loft is a fresh addition to the downtown Long Beach area and a prime space for clients to meet with the sales and design team. Contact your local team at 949-645-4660 and make sure you stop in and visit. READ MORE

NEW OK DINGHY CLASS LEADER Singlehanded Champion Takes Lead In Sail Development © Robert Deaves Charlie Cumbley came into sailing through his family. “My grandpa worked for a boat builder, and then I got started just for leisure,” he says. “I wasn’t involved in any junior race teams. I just went out and found any boats I could sail, and that’s how it progressed until I got relatively serious in Finn sailing in my late teens and ended up meeting Paul Hobson. For my sins,” he adds, laughing. Hobson invited him to join North Sails One Design in 2006, which Charlie describes as “an awful long time ago.” Today his title is One Design Sales Manager for the UK and gets involved in “everything from Optimists to J/80s.” He’s recently been named class leader in the OK Dinghy. By his own estimate, Charlie has won something like fifteen national championships “across a little range of vessels.” He earned a spot on the podium at many international OK events the last couple of years and was winning the 2018 OK Dinghy Europeans until the last race, when he lost a tight battle with Star champion Freddy Loof. Though he feels he has the most experience in singlehanded boats, Charlie also sails Etchells and J/70s. “Nothing gets too stale, which is quite nice. And,” he adds, laughing, “I’ve got someone else to blame.” © Robert Deaves OK Resurgence When Charlie first started sailing the OK, the fifty year old class was just starting what he calls its second wind. “130 boats at the 2018 Worlds; it’s definitely on the up.” Older designs like the OK are coming back, he thinks, because people get tired of just going fast. “They like getting back into a boat where the racing’s really close and really tactical.” And unlike the Finn, “you don’t need to be a monster of a guy” to sail the OK, though there are plenty of Olympians (like Loof) in the fleet. “Sailors who maybe aren’t quite as strong as they used to be can get involved in this class, and if they’re good, they can have some decent results. People always like doing well, don’t they?” The OK offers enough tweakability for retired Finn and Star sailors, thanks to its origins as a trainer for the singlehanded Olympic class. The masts are carbon, “not quite as exotic as the Finn mast, so it’s not like a small mortgage to buy one, but they’re quite nicely refined now. The new boats they’re knocking out are really nice bits of kit.” © Robert Deaves Sail Development The class is strong in northern Europe and also in New Zealand and Australia. Charlie says having design groups in both hemispheres helps ensure year-round progress. “They can push on things through their summer, when it’s our winter and a bit quieter, and vice versa. They give help and feedback and design input, and then I compare it to what we’re getting over here, and then we make a decision on where we go. So, there’s been quite a lot of development in 2018. The sail that won the Worlds was the Kiwi design, which was great. Our UK design was third and leading up until the last race.” North offers three different OK sail designs, so there’s something for everyone regardless of “where you sail, how heavy you are, and how stiff your mast is.” For big events, each competitor can measure in two sails. “You could quite happily measure in a full and a flat sail, which is what I do and what other guys do. You end up with a two sail inventory.” And each design has a large crossover, he clarifies, “so that you don’t get into that situation where you’re sailing round in five knots with a sail that’s designed purely for 20 knots and pulling your hair out.” Mast stiffness used to be a large variable, but over the last few years the masts have become more one design—which means sail design can be more refined as well. “All the sails are built with custom luff curves to fit the mast,” Charlie says, “ just like we do in the Finns for the Olympic guys. It’s pretty customizable.” Charlie travels quite a bit to sail, so when he’s home he tries to spend as much time as possible with his wife and two kids. His older daughter is almost big enough for Optimists, which means “I’ll become an Optimist parent. Scary things happen then!” As for the OK Dinghy, Charlie hopes to one day step on to the top of the Worlds podium—but not in 2019, since he couldn’t make it to New Zealand. “Hopefully, the Kiwi guys nail the Worlds and we’ll sit down after that and have a little chat and see things we can improve on,” he says. “Work on through the season. With more good sailors coming in, you need to keep pushing, getting those little details right.” © Robert Deaves READ MORE

SAIL POWER: DEPOWERING & POWERING-UP By Bill Gladstone This article is derived from the North U Trim Seminar. North U offers seminars, clinics, books, media, online training, and coaching. Visit NorthU.com to Learn More In the previous segment we explored sail shape and sail power in moderate air, and how proper shape varies with sea state. In this segment we explore Angle of Attack in moderate air trim and also techniques for de-powering in heavy air and powering-up in light air. Moderate Air Trim Angle of Attack At full power in moderate air we adjust the mix of depth and twist to suit the conditions – adding depth and twist as chop increasing to improve acceleration and create a wider steering groove, or trimming with less depth and less twist for higher pointing and higher speed in smooth water. Meanwhile we adjust and fine tune angle of attack through steering and traveler to maintain full power, speed, and balance. Much of the time this falls largely to the driver – footing off when underpowered or feathering up when overpowered to keep the boat at full power. As we push to the high end of moderate air, and particularly in puffy conditions, a helm response alone is not enough. In these conditions playing the traveler is also critical to maintaining proper heel, balance, and speed. (On boats without a traveler there are alternate techniques, covered in Sail Controls, later.) When the main trimmer is doing a great job the angle of heel and helm load will not change – the trimmer will play the traveler as the wind changes, down in the puffs and up in the lulls. When perfectly executed the main trimmer is really driving the boat upwind, with the rudder following along as a trim tab. Fig. 401 Angle of attack is controlled both by the driver and sail trimmers. Increase power by bearing off or trimming in; reduce power by feathering up or lowering the traveller down. Pulling the traveller up and sailing higher might provide the same speed at a higher angle. It would be worth a try… Heavy Air De-Powering In overpowering conditions sail power can be reduced by reducing angle of attack, by flattening the sail depth, or by increasing twist. Each reduces power, but which is preferred? Often it is best to start to de-power by flattening sails while keeping closed leeches to maintain pointing ability. This is the case as the wind often builds more quickly than the waves, so we get relatively smooth water in a building breeze. In chop or waves it may be preferred to use twist to control power while maintaining depth for acceleration. If steering is difficult, then de-powering with twist can create a wider, more forgiving steering groove. Most commonly, the de-powering progression would include changes in both depth and twist. Angle of attack is played moment to moment by the driver and trimmers to maintain speed, pointing and balance at full power: neither overpowered nor under-powered. A core challenge of upwind sail trim is achieving not just the correct total power, but the correct blend of angle of attack, depth and twist; and then adjusting total power and the mix to keep up with ever-changing conditions. Fig. 402. The boat shows great trim in fresh breeze, with sails flat and twisted, and the traveler down. Note the modest heel and balanced helm. Note also matching shape of the jib and main. Steering in Waves When the boat is difficult to steer in the waves that often means it is out of trim. If you’re underpowered as you squeeze up and knocked on your ear as you bear off it is not bad steering – it’s poor trim. Adding some twist and depth will create a wider steering groove and provide more punch to get through the waves. We are often told to steer up the faces and bear off down the backs of waves. We’re going to change that: If the boat is well trimmed it will find its own best path through the waves. You can help by playing the traveler (or sheet if vang sheeting) rather than steering with the rudder. Fig. 403. For best performance in waves set up with some depth for punch and with twist to provide a more gradual onset and release of power. Light Air Trim Less than Full Power And what about light air, when we don’t have power to trade? When sailing in underpowered conditions we sail with a wide angle of attack to increase power, a deep sail shape for added power, and as little twist as possible without stalling airflow. As we’ve seen in earlier segments, trimming to the wind gradient often requires substantial twist in light air. The wide angle of attack and deep sail shape that add power in light air are also prone to stalling, so substantial twist in needed in lighter winds to encourage airflow and prevent stalling. Fig. 404. In light air we maximize power with a wide angle of attack, deep sail shape, and just enough twist to prevent a stall. Re-Powering In a fading wind the chop will often linger so power is added with depth as the breeze fades while twist is maintained to preserve a wide steering groove. One final bit We’ll see more on this theme of Mix of Power throughout the remaining Upwind Trim segments. We’ll also address the balance of power between the main and jib as part of our ongoing mix of power discussion. Pro Tip (wink wink) To protect your reputation as a sail trim expert NEVER make a change in trim as the breeze fades. Here’s why: In a building breeze pretty much any change you make will improve speed, so when you see a puff coming, make a change. The puff hits and voila – performance and your reputation improve. In a fading breeze, no matter what you do, performance will suffer. If you make a change as the breeze fades then your reputation will suffer along with performance – DON’T do it. © Copyright Bill Gladstone READ MORE

NORTH SAILS CONFIRMED AS SUPPLIER TO STAR + STRIPES TEAM USA The New, All-American Team Have Picked The World’s Leading Sailmaker In Its Quest For A Historic Victory 📸 Stars + Stripes Team USA North Sails is proud to announce they have been selected to supply sails and design expertise to Stars + Stripes Team USA, one of the American challengers for the 36th America’s Cup. This follows the news (Nov 2018 ) that North Sails is the sailmaker of choice for defender Emirates Team New Zealand, and Challengers Prada Luna Rossa and INEOS TEAM UK, who are all vying to win the oldest trophy in international sport. JB Braun, Director of Design and Engineering for North Sails, will also serve as technical director for Stars + Stripes Team USA. In doing so, JB joins an enviable roster of North Sails designers who are currently embedded with North Sails’ confirmed teams. They all bring with them expertise and innovation to a highly complex and competitive challenge in building a boat to win this event. As part of his role, JB will be looking at how to maximize all the elements that make the ‘Engine above Deck’ on these powerful foiling monohulls. He will also lead further development and optimization of the design package Star + Stripes Team USA have purchased from Emirates Team New Zealand. 📸 Stars + Stripes Team USA JB Braun commented: “I have been involved in the America’s Cup for over 18 years and in that time I have seen technology and innovation change things beyond recognition. But one thing remains the same – the fastest boat wins. That means every part of your boat, from the carbon hull and foils to the mast and sails, with an emphasis on the sailing team, have to be the very best and able to sail faster and smarter.” “Our challenge this time, with a new boat and much to learn, is how we ensure we are sailing the boat close to optimum trim a higher percentage of the time than our competition. I am excited to be a part of Stars + Stripes Team USA and see how we develop the boat and team into a winning unit.” Braun’s expertise with America’s Cup programs is rivaled by few. His America’s Cup career began with Young America in 2000, then he joined Stars + Stripes in 2003, followed by 12 years with Oracle Team USA. Braun was an integral part of the aero design and analysis that helped Oracle Team USA make their famous comeback during the 34th America’s Cup in San Francisco. Staying true to their American roots, Stars + Stripes Team USA will work closely with the North Sails design and construction team in Minden, Nevada, the birthplace for North’s 3D sailmaking innovation. Ken Read, President of North Sails, commented: “We pride ourselves at North Sails as having the best minds, known for pushing boundaries and finding answers to challenging problems. There is no doubt that this new boat will be cutting edge and very fast, but how you combine this new aero package with crew limitations and reliability will be the key to victory. JB is a proven success in the America’s Cup but more than that, he understands how to bring all the elements of design, technology and innovation together to create something that delivers. I am delighted that he has been able to join another Stars + Stripes team, this time with a new generation of sailors and a whole different ball game. I can only look forward to watching how things move from the design process to the sailing stage and where the teams get to with this new rule.” Stars + Stripes Team USA Co-Founder Mike Buckley (L) and Helmsman Taylor Canfield (R) 📸 Stars + Stripes Team USA READ MORE

3Di BRINGS WINGS TO NEW HEIGHTS AT THE J/88 MIDWINTERS Five Bullets Guarantees The Title in St. Pete © Chris Howell Taking on a new sailing challenge is nothing new for Mike Bruno. Through nearly 3 decades of racing he and his team have raced, and succeeded, in several different boats. So when the J/88 launched onto the scene Mike jumped in and the Wings program had a new sailing challenge to conquer. Fresh of their recent win at JFest in St. Petersburg we wanted to know more about the Wings team and their thoughts on their 3Di sails. Mike, first of congratulations to you and your team on Wings for your continued success in the J88. Can you share with us a little bit about your sailing background and how long have you been sailing in the J88 class? Thanks! We are having fun with Wings and continue to learn more and more about sailing the J88 fast. As how we got this far, I started out as casual cruising sailor and began racing about 25 years ago. I would say that in the past 15 years or so we have gotten fairly serious about racing and being competitive. We had a Jonmeri 40’ named Karjala, which I built and raced for many years, then a series of ‘Wings’. First was a J/124 I raced for 2 years. It was a nice boat but we found it to have a tough rating to sail, so we traded it for a J/122. The J/122 really was a great step and I successfully campaigned that boat, with a few partners, for 8 years initially, as a one design. The J/122 program brought us some great results including winning the North American title twice and a Rolex award at a NYYC regatta. That brought us to the current Wings, the J/88, which I bought the 3 years ago. We have really enjoyed this program and had great wins including the inaugural J88 North Americans as well as a big win at Key West Race Week. The pictures from the JFest Regatta in St. Petersburg made it appear that you had good breeze for the event. Did the conditions match up with the pictures throughout the championship? St. Petersburg Yacht Club runs excellent events and Tampa Bay can be a bit “challenging” so you really never know what you will get on any given day, especially in the winter. That said, the sailing conditions at the JFest were certainly fair. Across the entire event I’d say the breeze ranged from 8-20 knots. I think the cooler conditions (locals may call it “unseasonable”) played a role in how much pressure we had throughout the weekend. Also, Tampa Bay is quite shallow so there was a reasonable amount of sea state but the very steady breeze overall and significant shifts kept every team on their toes and working hard looking for opportunities to be gained via tactics and gear changing. Can you tell us a little bit about your team, who does what and how long have you all been together? The team is really made up of a large group of great friends and awesome sailors and, like many others, we find we are rotating in and jumbling pieces for any particular event to make sure we, not only do well, but have fun. For JFest Midwinters I held the tiller and had Chris Morgan, a local Floridian, trim main and work with me on our overall speed. Stu Johnstone was our tactician and really had a great feel for the bay the entire weekend. Tim Randall ran the pit for us while Mike Booker did all the headsail trimming and Stephen Yip ran the bow. Looking back through the weekend what were the keys to your success at the mid-winters? It’s a great question as it forces me to look back and try to pinpoint a few things I think we did really well. 1. The biggest thing was we were just able to sail a bit higher and faster than the fleet much of the time. A lot goes into that for sure. The team really worked hard on proper rig tune and working the sails and trim constantly to maximize the boats potential but our new North 3Di sails were probably the most significant difference in our ability to make that happen. 2. Our crew work was excellent! As a skipper knowing that your team can execute any maneuver at a seconds notice and pull it off without a hitch is a huge confidence builder for the entire boat. It seems that at almost every mark rounding we seemed to gain 1-3 boat lengths. 3. I mentioned earlier that Stu Johnstone called or tactics for the weekend and he was really on tactically this regatta Stu didn’t miss anything which also gave us terrific confidence. We did make a few mistakes in the event, including being over early at the start in 2 races.In the last race we were over (again) and we started, probably, 300 yards behind fleet but Stu kept us in the game, and we kept using our boat speed and crew work to do all we could to gain distance and we still nearly won the race!! I guess maybe the new saying is “When you have a great team and fast sails it’s never over until it’s over!”. What are your 2019 sailing plans for the J88? Wings has a very full 2019 sailing calendar. We have already done the Egmont Key Race and St. Pete J Fest. Up next in February is the St Pete NOODs then we head up to Charleston Race Week in April. From there the team will go back north for the American Yacht Club Spring and Fall, Cedar Point One Design Regatta, Block Island Race Week, possibly the New York Yacht Club 175th Regatta as well as J Fest in Newport with a focus on the J88 NAs in mid October. Thanks Mike and congratulations again. Sounds like you have a full schedule set with an awesome team. Good luck the rest of the year, have fun and sail fast! Learn about North 3Di products for the J/88 Class. READ MORE

DIE NÄCHSTE MESSE STEHT VOR DER TÜR SuisseNautic in Bern Vom 20. - 24. Februar finden Sie uns an der SuisseNautic in Bern in der Halle 3.2 am Stand E02. Gerne können Sie schon heute einen Termin mit uns abmachen: 071 680 00 80 READ MORE

NORTH SAILS TAKE TOP HONOURS AT THE BAY OF ISLANDS SAILING WEEK A record-breaking number of boats turned out for the 2019 CRC Bay of Islands Sailing Week, with yachts carrying North Sails taking top honours in many divisions. Ker 40 Icebreaker 📸 Lissa Reyden A total of 116 yachts entered this year, up from just over 100 in 2018, and an extra Island Racing division had to be created to accommodate all the entries. The biggest winner of the regatta was local boat Kia Kaha, skippered by Chris Hornell, an older TP52 which took out the South Pacific PHRF Championships trophy with a local crew and an inventory including many North sails. Division A was won on line by TP52 Mayhem, with a full North Sails wardrobe. But everyone was a winner who got to spend three days sailing around one of New Zealand’s most beautiful bays, enjoying near perfect conditions with 8–12 knots and sunny skies every day. North Sails designer Magnus Doole, sales and marketing manager Andrew Wills, loft manager Guy Hewson and master sailmaker Casey Bellingham raced on different boats in the highly competitive B division. Doole and the crew on Ker 40 Icebreaker came out on top, winning on line, PHRF and general handicap, after taking out every race on line. Doole says conditions were perfectly suited to Icebreaker, which was utilising a new North 3Di mainsail and number 1.5 jib. "The 1.5 design is based on the latest-generation TP52 Super Series mould, and we definitely had a noticeable VMG gain in its range," he says. "We decided that with the configuration changes we had made to the boat, we wouldn’t get a new number 1, but get a 1.5 and focus on having a great result in this regatta, where we knew conditions were often in that 8–12 knot range." There was a slight hiccup on the last day, when Icebreaker started prematurely and had to go back, but they quickly managed to get back out in front, before the first mark. "We had boat-speed to burn when we needed it," Doole says, adding that the Bay of Islands "is a pretty great place to go yachting." Also in the B division, Stomp 38 Titanium (now owned by Bellingham and his brother) finished second and Clockwork (with Hewson aboard) third on PHRF, while Soto 40 Alegre, with Wills in her crew, finished second on line. 📸 Lissa Reyden Boats with North sails also took honours in the various Island Racing divisions, where yachts sail longer courses around the beautiful Bay. Ran Tan, with North general manager Richard Bicknell on board, won Island Racing A on PHRF and general handicap, with Bull Rush third on general; First Picasso took out general handicap in Island Racing B; Rattle n Rum was first on PHRF in Island Racing C, and Black Magic first on PHRF in Island Racing F. The sportsboat division provided some close and exciting racing, with pro sailor Stu Wilson and his crew on Shaw 7 Angry Dragon, using North sails, taking out line and handicap honours. North One Design manager Derek Scott steered Magic 25 w-8 Up to second place on general handicap. There was also tight racing in the Young 88 division, where North Sails expert Matt Kelway sailed aboard Flash Gordon, using a North Sails main cut to the new radial design. "We had a really great week, doing two windward-leewards and a harbour race each day," he says. "It was all tied up going into the last day and we had close racing the whole time." Kelway says it’s great to see Bay of Islands continuing to be so well supported by local sailors, with the fleet this year reaching record numbers in the event’s 17th year. "It’s fantastic that there were so many boats, and so much interest in the island racing divisions. You can do windward-leewards anywhere, but people want to get out and see the islands and what the Bay has to offer." READ MORE

NEW MELGES 24 3DI SAILS SHINES IN MIAMI Bruce Ayres’s Monsoon Dominate The Bacardi Winter Series If there is one thing that is a constant at North Sails it is our team is never satisfied. We are constantly working to make better and faster sails and the recent 3Di development for the Melges 24 sails is not different. The North M24 team, along with sail designer Mike Marshall, spent time in Miami for the Bacardi Winter Series working with M24 teams, including teams Monsoon and Lucky Dog, on the new 3Di designs. The results were amazing with Monsoon combining 3Di speed with a talented team of sailors to win the event. North Melges 24 expert John Bowden caught up with Stars + Stripes Team USA Skipper and Monsoon’s tactician Mike Buckley to get some insights on the success of his team along the series and his impressions on the new 3Di mainsail for the Melges 24 class. Mike, congratulations again to the team on Monsoon. You had an incredibly impressive score line at the Bacardi Winter Series with top 5 in the all races of both events. Can you share with us a few key points, in your opinion, are some of the keys to success with your Melges 24 program? Thank you, John, fun sailing against you and the other teams in the class. Sailing with the team on Monsoon is always fun as we work really hard and complement each other quite well. That said, there are some key points that we really focus on that I think any team can utilize to improve. Keep it simple, no home runs. Pass a boat or two each leg and trust the process. Speed, good crew work, no major errors. Though these may seem overly generic I really feel this helps us gain the consistency you mentioned and keeps the team prepared for success. You guys were very open to work with the new 3Di mainsail and spend time with our team optimizing the sail. How did the North 3Di main respond and perform in the range of conditions? The sails certainly performed really well across quite a broad range. We were happy with our speed which made my job easier! Did you make any changes to your tuning for the new 3Di main? That is a good question. The Melges 24 is a fairly high tech boat with strict one design rules so making sure the tuning is spot on for every condition is critical. We found that we are tending to sail a little bit tighter on our rig tensions, on average, with the 3Di main. Also, we found we were trimming a bit harder across the board. Not a huge amount but certainly something we talked about which, possibly, gave us another gear at times. What do you see as the biggest advantage of changing to the new 3Di main? One thing that is great about sailing with Bruce and the team on Monsoon is we always try to be on the front of the technology shift. When sailing in tight, competitive fleets like the Melges 24, it is fairly important to be leading the pack when looking for a competitive edge. Having that technology available in the Melges 24 and being open to test and lead the way made the path to using 3Di a great option. Monsoon is one of the best Melges 24 teams in the fleet. How are you preparing the 2019 season and what do you attribute your team’s success? We have a really fun team to compete with and I think that’s important. As we build Stars + Stripes Team USA I always have in the back of my mind the fantastic culture we have on Monsoon. We all want to hike harder for each other, we all want to trim better for each other, I want to hit shifts for my teammates. It’s not easy to find that chemistry but it’s probably the most important aspect of sport. Congratulations Team Monsoon! Power your Melges 24 with 3Di sails. Lucky Dog powered by the North 3Di jib for the Melges 24 class. READ MORE

THEIS PALM TAMES THE DRAGON Introducing Our New Class Leader Theis (far left) racing with his team African Queen celebrating the win at the 2018 Gold Cup. ©sailpix.fi North Sails expert Theis Palm, has been appointed class leader for the Dragon. Theis has sailed on a lot of different boats in his 42 years as a sailmaker—including the Crown Prince of Denmark’s Farr 40 and his Dragon. He’s won eight world championships (Soling, Yngling, H-boat, Dragon, and 1/4 Ton), 3 Gold Cups (Dragon and Nordic Folkboat), two Europeans (Dragon and X-79), and 28 Danish Nationals in a whopping nine different classes. He feels lucky to sail almost exclusively in One designs. “On a one design sailing day you sail one hundred percent of you time spend, but on a big boat you only sail forty percent and the rest of the time is organizing.” He’s based out of the loft in Herlev, Denmark, less than half an hour northwest of Copenhagen, though he spends a lot of time traveling to regattas. Palm began sailing in the Optimist in 1968, and moved on to other dinghies like Europe, Flipper and OK, before an opportunity to sail with double gold medalist Poul Richard Hoj Jensen led him to sail small keelboats. He was part of a medal-winning Danish Olympic training squad, and his team finished 3rd at the Pre-Olympics in 1995. He has been working as a sailmaker since 1977, and spend five years as Head coach for Danish Olympic Sailing Team up to the 2004 Olympics in Athen. He went to his first Dragon regatta in 1998. “I like the Dragon because it’s a true three person boat. It was designed back in the 1920s, and it’s a very sensitive boat which makes it fun to sail. Many very good sailors sail the boat up to a high age, and that is great.” He also enjoys the high level of competition. The annual Gold Cup has “between 10-15 boats that could win. There’s not many classes where you have so many boats that can win an event. There are many good sailors and a lot of professional sailors from Russia, England, Germany and United States. “I had been helping some Russians teams and then they actually switched over to our brand. I am a little bit happy about that because they are pretty strong in the class at the moment, and most of them are using our sails. So that has been a good effort there.” ©sailpix.fi Palm enjoys sharing his expertise with other Dragon teams and also helping North’s design team fine-tune the sails. “I’ve been sailing a lot in my life, so I have a good feeling for how sails should look to be fast… and I started sailmaking when we made them 2D on the floor. Understanding that can help to transfer good designs into 3D is a Big advantage.” Dragon class rules currently limit sail materials to woven cloth, which he says limits the design options to improve already fast sails. “We have very nice shaped Dragon sails, so it’s hard to find another two to three percent in the sails. Maybe you find it in a very, very narrow wind range, but we build huge crossovers sails so you don’t take the wrong sail. We’ve been very conservative with designs, because we are hard to beat.” His customers also appreciate design stability. “They know our product. I have sailors who order a new sail and say, ‘No changes please? Good, I can use same mark on my mainsheet. Don’t change anything because we are fast!’ We have a very good product line.” Because development happens very slowly, Palm focuses “more on the service, or the tuning, or the setting on the boats, where you can move clients to be better. I like helping them to better understand what happens with the sails when you tune the rig. That’s why it’s so important to meet clients in the field.” And Palm says North Sails will be ready to evolve when the class is ready. “The company is really looking into the future all the time. 3Di on smaller keelboats is an outstanding product. I hope in the next five years we can convince many One Design class to change their class rules.” Until then, Palm will keep learning new tricks and passing them along to other Dragon sailors. “There are so many things to trim on the boat and the rig, it really makes a difference even if you make very small changes.” Interested in sails for your Dragon? Contact your local expert today. READ MORE

WHIRLWIND WEEK AT THE TORONTO INTERNATIONAL BOAT SHOW 10 Days of All Things Sailing for North Sails Toronto What a jam-packed 10 days it was for our Toronto crew at #TIBS2019. While the weather was less than favourable the first weekend, it was still a great time with friends old and new. Our reps from Kingston (George Jackson), Quebec (Miro Balcar) and Hamilton (Doug Folsetter) also joined us for the show! Office manager, Louisa Sonosky, shares how “the show was an amazing way to kick off the New Year and get people thinking about sailing again.” Everyone was able to put a little bit of summer in their winter and start getting ready for summer 2019. In addition to our local team, Bill Gladstone of North U, along with Geoff Moore, was on hand presenting North U Seminars during the first and second weekend. Gladstone & Moore shared information on Tactics, Tips & Tricks as well as Upwind Sail Trim in the hour-long complimentary sessions. NEW this year was our 3Di RAW 360. Boats with North 3Di RAW sails command podiums worldwide in the most competitive events and classes. For 2019, North has applied this advanced technology to 3Di RAW 360, a new product tier which combines 3Di's signature shape holding with an easy to read, easy to trim, and notably long-life racing sail that is perfect for Club Race sailors with smaller boats. Sales expert, Hugh Beaton, says “this is an exciting new product that is pushing North Sails technology to club racers and the local racing circuit.” The Toronto crew of North Sails would like to say a big THANK YOU to everyone who stopped by and supported the team! READ MORE

CARIBBEAN COMEBACK Experts Share Thoughts About the 2019 Season Antigua Sailing Week ©Paul Wyeth According to Andrew Dove, North Sails Caribbean Area Manager based in English Harbor, Antigua, 2019 is on track to be the best year ever for sailboat racing in the islands. “We’re having a good year,” Andrew told us, when we caught up with him just after the New Year. “The work is piling in. The Caribbean is foolproof, it’s friendly. And obviously this is one of the ideal places in the world to sail.” Mike Toppa, who is based at North Sails in Fort Lauderdale and races several Caribbean events, agrees that 2019 is going to be a great season. “After the hurricanes last year, regattas were at maybe 80 percent capacity; this year it seems like everyone’s making up for lost time. We’re all ready to get racing again.” Organization Increases Numbers Good planning—of the overall winter calendar, and of regattas—is part of the reason for increased participation across the board, Mike thinks. “The Caribbean Racing Association has done a really good job coordinating all the schedules around the Caribbean so they don’t overlap. People have the ability to go to any regatta they want without missing out on another they might want to do. All of the events have stepped up their game with good, well-trained, race committees. Laying out courses, managing the regattas as people expect at a world class level.” “Mike is quite right,” Andrew says. “There’s definitely professional management for racing in the Caribbean. The people who don’t live here participate for a whole range of reasons, but one is that the racing is very good nowadays.” Andrew is predicting that the Caribbean 600 will have a record number of entries this year. All the events are growing, Mike adds. “It must be something that’s calling people in. Definitely an optimistic feel.” Les Voiles de St Barth © Paul Wyeth Antigua: Great for Cruisers, Racers, and Duty-Free Each Caribbean season begins with the Salty Dawg Rally, a group of cruisers who travel south in tandem each autumn. Usually their destination is the Virgin Islands, but last year’s hurricanes sent them to Antigua—and they liked it so much, a large number came back again this year. “For that week,” Andrew says, “there were events every night. We organized a 3Di evening at the loft, we had videos going, and we were giving away crepes and drinks. Most of the people didn’t have a clue what 3Di was, but now they appreciate its real advantage. And it was quite the party.” Antigua has become a favorite hub for larger yachts as well because of its easy logistics, Andrew explains. “In the past it was difficult to ship things in and out; now it’s very easy to get provisions and sails delivered. And we’re very lucky with North Sails, they now allow us to deliver sails to the boats and catch up with the paperwork afterwards. Which means that when people come to regattas here and leave things for the last moment, it’s not a disaster.” Docks of Antigua in English Harbour Yacht Transports Another reason the Caribbean is attracting more boats is that it’s now easy to get there without sailing across open ocean. “In Fort Lauderdale,” Mike says, “a lot of yacht transport ships come in from Europe with a lot of the same boats you see on the racecourse. There are direct ships to St. Maarten and Antigua and different places. The costs are coming down, convenience is up, the scheduling is a lot more regular, and it’s definitely an option a lot of people take advantage of.” Multihulls Multiply Andrew says he’s been noticing a larger percentage of multihulls joining the Caribbean regattas. “Five years ago, you’d see one or two. Now there’s a class or even two classes of them.” Adding a widely accepted French handicap system has made it easier for regattas to handle scoring. At the opposite end of the size and age spectrum, he adds that Antigua will host the 2019 Optimist Worlds in July, out of Nelson’s Dockyard in English Harbor. “That’s a major event because of the number of participants—not only the children but parents and staff. It’s offshore racing because they sail a few hundred meters and they are out to sea.” Antigua Sailing Week © Paul Wyeth 3Di: Fewer Overnight Repairs For this year’s regattas, Andrew plans to race with his customers by day and repair sails by night—though with 3Di, he says, the volume of repairs are way, way down. “In the past whether it be string sails or even 3DL, we would have to do sail repairs throughout the night. Now at big regattas, we’re asked to do small modifications but we’re not actually repairing the sails.” As 3Di NORDAC becomes more popular with cruisers, he predicts that repairs will drop off even more. “Fortunately we have a growing number of customers; if we didn’t, we’d be losing business.” 3Di is a huge advantage over laminated sails in the Caribbean, Mike agrees, because heat and humidity don’t affect 3Di. “We see it here in Florida too; all of a sudden sails are lasting six or seven years. Whereas a string sail would last three years. One of our customers has a 37m Dubois sloop,” Mike continues. “Their 3Di sails are three years old and are doing the St. Barth’s Bucket this year. I was talking to the captain the other day and asked how the sails are holding up, and he said they look like they’re brand new. They’re excited to race and they’ve got the sails to do it.” “I actually don’t think we can overstate the change 3Di has brought into our market,” Andrew adds. “People here go sailing for more than a couple of hours, so it’s a real advantage. The only big repairs we have now are non-3Di.” “You’ll get your evenings back,” Mike replies, chuckling. Onsite pop-up loft, St. Barth READ MORE

OLYMPIC GOLD MEDALIST ŠIME FANTELA LATEST TO JOIN NORTH SAILS World’s Leading Sailmaker Recruits Olympian To Grand Prix Team Sime Fantela (L) and Mihovil Fantela (R) after winning their gold medal in the 49’er class at the 2018 Sailing World Championships in Aarhus, Denmark. North Sails today announced that Šime Fantela will be joining the Grand Prix segment, putting to use his experience across a range of classes. Šime will work closely with Grand Prix Segment Leader Paul Westlake, helping the design and product development teams to quantify their ongoing innovations. After winning gold in the 470 class at the 2016 Olympics, Šime has his sights firmly set on a second Olympic gold medal in Tokyo 2020—this time in the 49er. He’s also sailing as strategist in the 52 Super Series on the newly launched Bronenosec. North Sails Global Head of Sales John Welch commented: “We are really delighted that Šime has agreed to join North Sails. Not only is he a great sailor with a wealth of experience, but he is a huge asset to our pro sailor network, working across sail development and testing. We firmly believe that we need the best people out on the water pushing our sails to the limits and it is only in doing this we are able to give our customers what they want – the best product for whatever type of sailing they are doing. Through the addition of Šime to our team, we continue to learn from the best of the best to deliver the highest performing products.” Paul Westlake added: “With such depth of experience and raw talent, Šime can help us develop our understanding of sailing campaigns and Grand Prix boats even further. He is an exciting, talented sailor and is quickly turning into an important opinion leader who can help us engage and inspire the younger generation of pro sailors. We believe that the North Sails team and technology can enhance his challenge for Gold in Tokyo and in turn we can learn so much from him, competing at the highest level of the sport. In order to continue to innovate we need to be challenging ourselves to think differently, and through working with Šime we see a great opportunity to do that.” Šime commented: “I was delighted to have been asked to work with North Sails alongside my Olympic campaign. I really believe that I need to surround myself with the best possible people and to work in the best possible environment in order to become not only a good sailor, but also the most technically skilled sailor I can be. I have always been interested in the technical side of sailing and I really enjoyed making sails for myself in my campaign for Rio 2016 – I know how important it is to know everything you can about the sails you use in order to get the most out of them.” “There is no better place to continue growing my knowledge than joining the greatest team in the world, North Sails. I am excited to be working with some of the best designers out there as well as the technically most advanced computer programs that exist. I look forward to learning more about how to apply them both to my campaign but also to help others get more from their sails and understand as much as they can about their ‘engine’.” 📸 Star Sailors League / Gilles Morelle READ MORE

ŠIME FANTELA NAJNOVIJI CLAN EKIPE NORTH SAILS Vodeći svjetski proizvođač jedara regrutirao je olimpijca za svoju Grand Prix ekipu Šime Fantela i Mihovil Fantela, nakon osvajanja zlatne medalje u klasi 49er na prvenstvu svijeta u Aarhus-u, Danska. Kuća North Sails objavila je da će se Šime Fantela pridružiti njihovoj ekipi za Grand Prix i svoje dugogodišnje iskustvo upotrijebiti u više segmenata. Šime će surađivati s voditeljem odsjeka Grand prix, Paulom Westlakeom, i ekipama za dizajni i razvoj proizvoda s ciljem inovacije. Nakon zlata u klasi 470 na Olimpijskim igrama 2016. Šime je odlučan u namjeri da uspjeh ponovi i 2020. u Tokiju, a odnedavno je i strateg u 52 Super Series nove posade Bronenosec. Predsjednik prodaje North Sails John Welch kaže: "Oduševljeni smo što se Šime pridružio našoj kompaniji, jer on nije samo izvrstan jedriličar s golemim iskustvom, nego i važan dodatak našim timovima koji se bave razvojem i testiranjem jedara. Čvrsto smo uvjereni da naša jedra na vodi mogu najbolje testirati samo najbolji jedriličari, jer samo tako možemo klijentima ponuditi vrhunsku kvalitetu – najbolje jedro za njihov brod i njihov stil plovidbe. Šime će našem timu ponuditi svoje znanje; od njega ćemo mnogo naučiti o tome kako stvoriti proizvod spreman za vrhunske performanse." Paul Westlake dodaje: "S tolikim iskustvom i tolikim urođenim talentom Šime će nam pomoći da još bolje razumijemo kako misli i plovi vrhunski jedriličar i njegov Grand Prix brod. Šime je vješt, nadaren jedriličar koji evoluira u jednog najvažnijih jedriličara našeg vremena i koji će nam pomoći da privučemo pažnju i nadahnemo nove generacije profesionalnih jedriličara. Vjerujemo da će ekipa North Sails i tehnologija koja nam stoji na raspolaganju pomoći Šimi da ostvari svoj cilj, zlato, u Tokiju, a zauzvrat ćemo mi od njega naučiti od njega sve što zna o natjecanju na najvišoj razini. Da bismo mogli ponuditi inovacije potrebno je razmišljati u drugim okvirima od ustaljenih, a suradnja sa Šimom važna je i velika prilika da to postignemo." Šime Fantela prokomentirao je buduću suradnju: "Bio sam oduševljen kad su mi North Sails predložili suradnju. Uvjeren sam da se potrebno okružiti najboljim suradnicima i raditi u najboljim mogućim okolnostima da se postane ne samo dobar jedriličar, nego i najvještiji jedriličar koji mogu biti. Uvijek me zanimala tehnička strana jedrenja i bilo je lijepo surađivati na izradi jedara za natjecanja u Riju 2016. - znam da je važno znati sve o jedrima da biste iz njih znali izvući najbolje." "Nema boljeg mjesta za nastavak razvoja mojeg jedriličarskog znanja od najbolje ekipe na svijetu, North Sails. Uzbuđen sam pri pomisli na suradnju s najboljim dizajnerima i na najnaprednijim kompjuterskim programima koji postoje. Veseli me i što ću naučiti više o tome kako da primijenim naučeno u pripremama i natjecanjima, ali i pomognem drugima da dobiju više od svojih jedara i razumiju sve što znaju o pogonu svog broda.” 📸 Star Sailors League / Gilles Morelle READ MORE

ROYAL CORK YACHT CLUB U25 ACADEMY North Sails Ireland enjoyed a great day out on Friday with the Royal Cork Yacht Club Under 25 Academy. We were looking at some new 1720 3Di Nordac upwind sails and the North 1720 T-6 Class spinnaker complete with the EY logo. EY have sponsored the U-25 squad and as part of that North Sails Ireland were delighted to be involved with the provision of a new spinnaker complete with the EY Logo. We were blessed with amazing conditions for the photo shoot on Friday, 10 knots of wind, 10 degrees temperature and even the odd glimpse of the sun! As well as the official pictures we had our own media guys on the case Young Productions who were filming on shore and flying the drone to give a different view on proceedings. We would like to wish the U-25 squad good luck for the 2019 season and we look forward to playing our part as the season unfolds. Please take good care of that new spinnaker!! Sail FAST! READ MORE